Data Industrial 330 Owner's Manual page 4

Data Industrial Model 330 Owner's
Communications cable wiring
Field calibration requires a Data Industrial A330 Programming kit
(consisting of a custom cable and software) and a PC running
Windows 9x, ME, NT, 2000 or XP. In order to program, the Model
®
330 must be connected to power, and the A301 cable must be
connected to the Model 330 Comm port connector and an available
9-pin COM port on a computer.
Note:
The Data Industrial A301 Cable will work with all 300 Series
products. However the older version of the cable (A300) does
not have sufficient bandwidth to work with the 340 Series Transmitters.
Data Industrial provides free programming software updates via the Internet for all of 300
Series devices. Go to www.dataindustrial.com for these updates.
4
Manual
Location of the
DIC Communication Port
N.C.
ComB
Hi
GND
Low
utput
DIC Comm.
Port
®
DIC Comm Port