1. Manuals
  2. Brands
  3. Data Industrial Manuals
  4. Relays
  5. 330
  6. Owner's manual

Data Industrial 330 Owner's Manual

Relay control
Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
AC Load/DC +
AC Common/DC -
Power Out
(+)
Input
(-)
Shield
The Model 330 is a compact, programmable relay control capable of converting the signal
from a Data Industrial flow sensor into a flow switch.
With an onboard microcontroller and digital circuitry, the Model 330 is programmed from a
Windows
based computer program. This eliminates the need to set dip switches or
®
potentiometers and produces precise, accurate and drift free control of the relay outputs. In
addition to accepting the Data Industrial square wave signal, the Model 330 can accept other
pulse and sine wave inputs.
The compact cast epoxy body measures 1.75” (44mm) x 2.75” (70mm) x 1.5” (38mm) and can
easily be mounted to panels, DIN rails or enclosures. With multiple inputs, ease of use and a
variety of enclosures, the Model 330 is a
powerful, competitive priced relay control.
Installation
Mechanical installation
The Model 330 transmitter may be surface
mounted onto a panel, attached to DIN
rails using adapter clips or wall mounted
using two optional enclosures.
Location
Although the Model 330 device is encapsulated, all wiring connections are made to exposed
terminals. The unit should be protected from weather and moisture in accordance with
electrical codes and standard trade practices.
In any mounting arrangement, the primary concerns are ease of wiring and attachment of the
programming cable.
The unit generates very little heat so no consideration need be given to cooling or ventilation.
Surface Mount Installation
The Model 330 may be mounted to the surface of any panel using
double sided adhesive tape or by attaching fasteners through the holes
in the mounting flanges of the unit.
DIN Rail Mounting
Optional clips snap onto the mounting flanges allowing the Model 330
to be attached to DIN 15, 32, 35 mm DIN rail systems.
DATA INDUSTRIAL CORPORATION 11 Industrial Drive, P.O. Box 740 Mattapoisett, MA 02739-0740 USA
Phone: (508) 758-6390
N.O.
Industrial
ComA
N.C.
ComB
Hi
Com
Low
Output
Model: 330
SN# 0000000
DIC Comm.
Port
®
FAX: (508) 758-4057 email: sales@dataindustrial.com
Model 330
®
Owner’s Manual
Model 330 Ordering Matrix
Series
Programmable Local Relay Control
Options
Transmitter Only
W / NEMA 4X Enclosure
W / Metal Enclosure
W / Plastic Enclosure
W / DIN Rail Mounting Clips
Relay Control
by Data Industrial
EXAMPLE:
330
330
PN# 72039
REV A 03/8/02
-
xx
00
01
02
03
04
Data
®
Industrial

Advertisement

Table of Contents
loading

Summary of Contents for Data Industrial 330

  • Page 1 ® potentiometers and produces precise, accurate and drift free control of the relay outputs. In addition to accepting the Data Industrial square wave signal, the Model 330 can accept other pulse and sine wave inputs. The compact cast epoxy body measures 1.75” (44mm) x 2.75” (70mm) x 1.5” (38mm) and can easily be mounted to panels, DIN rails or enclosures.

  • Page 2: Wall Mounting

    Manual Wall Mounting Model 330 Dimensions Optional metal and plastic enclosures are available to mount the Model 330 to a wall when no other enclosure is used. The enclosure is first attached 1.50” Side to the wall using fasteners through its mounting 3.65”...

  • Page 3: Sensor Wiring

    1) Connect the Red wire of the 4000 to Power on the Model 330. 2) Connect the Black Wire of the 4000 to the Sensor (-) on the Model 330. 3) Connect the Clear Wire of the 4000 to the Sensor (+) on the Model 330.
  • Page 4 However the older version of the cable (A300) does not have sufficient bandwidth to work with the 340 Series Transmitters. Data Industrial provides free programming software updates via the Internet for all of 300 Series devices. Go to www.dataindustrial.com for these updates.
  • Page 5 1. Load the interface software into the computer. 2. Connect the computer to the Model 330 transmitter with the Data Industrial A-301 communications cable to the socket labeled “D.I.C Comm Port”, taking care to properly align the tab on the plug and socket to maintain polarity.
  • Page 6 Press to exit parameters screen and data to the 330. to go back to main screen. Press to restore the factory default Press to refresh the parameters settings to the screen. Must press screen with the current 330 settings. “send” before values take effect.

  • Page 7: Sensor Calibration

    Weight: 5A@30VDC 4.8 oz. with headers installed 5A@125VAC 5A@250VAC Accessories: A-330 programming kit containing software Time Delay: and 3' A301 cable. 1-9999 second delay between flow point and relay actuation A-330-20 programming kit containing software and 20' A301-20 cable. (longer...

  • Page 8: Factory Defaults

    Data Industrial Model 330 Owner’s Manual FACTORY DEFAULTS Default Values Customer Values Serial Number Version Sensor Type Pulse offset= Flow Rate Units Alarm Type High Alarm Latched High Alarm Set Point High Alarm Set Point Delay High Alarm Release Point...
  • Page 9 Data Industrial Corporation (“Seller”) of 11 Industrial Drive, Mattapoisett, Massachusetts 02739-0740, U.S.A., warrants to the original purchaser of its product that such product manufactured by Data Industrial Corpo- ration shall be free from defects in materials or workmanship when installed, serviced and operated ac- cording to Data Industrial Corporation instructions or in other such normal use.

Table of Contents