Table of Contents
Advertisement
Instrument operation
Helm control
Switch panel
In addition to touching the multi-function dis-
play directly, you can use the switches to op-
erate various functions.
1 "HORN" switch
2 "BILGE" switch
3 "BLOWER" switch
4 "ACC"2 switch
5 "ACC"1 switch
6 "NAV LIGHTS" switch
"HORN" switch
Activates the horn. The horn can be used to
signal other boats as required by the "Rules
of the road". (See page 18.)
The switch light comes on while the horn is
operating.
"BILGE" switch
Turns the bilge pump on or off. (See page 92.)
The switch light comes on while the bilge
pump is operating.
TIP:
Even if the bilge pump is turned off, the pump
will operate every 2 minutes when the house
battery switch is in the on position.
39
1
2
3
4
6
5
"BLOWER" switch
Turns the blowers on or off. (See page 101.)
The switch light comes on while the blowers
are operating.
"ACC"1/"ACC"2 switch
These switches can be used to operate an
electronic device that is installed later as an
accessory.
For more information, contact a Yamaha
Boat Dealer.
"NAV LIGHTS" switch
Turns the navigation lights (anchor light and
bow light) on or off. Each time the switch is
pushed, the combination of lights that are on
or off changes in the following 3 patterns.
Switch
Anchor
light
light
Off
Off
On
On
On
On
Bow
Multi-function
light
display
Off
-
On
Nav
Off
Anchor
Advertisement
Table of Contents
