Instrument Operation; Multifunction Information Center; Information Display - Yamaha WaveRunner VXS 2012 Owner's/Operator's Manual

EJU41850
Multifunction information
center
The multifunction information center displays
various watercraft information.
1 2
1 "SECURITY" indicator light
2 Select button

3 Information display

4 "L-MODE" indicator light
5 "WARNING" indicator light
Multifunction information center initial op-
eration
When the multifunction information center is
activated, all of the display segments and the
"SECURITY" indicator light come on. After 2
seconds, the warning indicators in the infor-
mation display go off, and then the center
starts to operate normally.
TIP:
The "SECURITY" indicator light will go off
when the engine is started.
Multifunction information center standby
state
If the multifunction information center does
not receive any operation input within 25 sec-
onds after the engine stops, the center will
turn off and enter a standby state. When the
engine is started again, the displays return to
their state before the center turned off, and
then the center starts to operate normally.
3 4 5

Instrument operation

EJU35024
Information display
The information display shows watercraft op-
erating conditions.
1
5
1 Tachometer
2 Speedometer
3 Hour meter/voltmeter
4 Fuel level meter
5 Check engine warning indicator
6 Engine overheat warning indicator
7 Oil pressure warning indicator
8 Fuel level warning indicator
EJU31503
Speedometer
The speedometer shows the watercraft speed
against water.
By switching the display units, the speed can
be shown in kilometers per hour "km/h" or
miles per hour "mph".
TIP:
"mph" is selected as the display unit at the
Yamaha factory.
1
1 Speedometer
2 3 4
6 7 8
33