Table of Contents
Advertisement
Label
Ⅱ
OPERATION
Introduction/Determining the Right
Machine
Congratulations on your purchase of our Cutter!
You've made an excellent choice! Our Green
Concrete cutter has been specifically designed as
the ideal machine for the professional contractor
who is engaged in concrete and asphalt flat
sawing.
This MFG10 Saw is designed for dry sawing of
concrete slabs utilizing diamond blades. The saw
has been engineered for general and industrial flat
sawing applications that include: Joint Sawing of
Green Concrete, Decorative Sawing in Cured
Concrete, Light Demolition Sawing and "V" Groove
Beveling. The simple and compact nature of the
machine makes it a perfect sawing tool for one
person to operate and transport. The saw
combines
innovative
components, and a committed attention to
state-of-the-art manufacturing.
OPERATING PRINCIPLE
The following instructions were compiled to
provide you information on how to obtain long and
trouble free use of the unit. Periodic maintenance
Meaning
WARNING!
All displacement of the machine outside the cutting area
shall be carried out with the tool not in rotation.
WARNING!
Cutting hazard. Always replace blade guard!
features,
top
quality
of this unit is essential. Read the manual in its
entirety and follow the instructions carefully.
Failure to do so may injure yourself or a
bystander.
DELIVERY CHECKS
Immediately upon taking delivery of your new
equipment and before putting it into service:
■ Read the operation manual completely—it
could save a great deal of unnecessary
expense.
■ Read the engine manual supplied.
■ Check
the
general
equipment—has it been damaged during
delivery?
■ Check engine oil level.
■ Check fuel levels.
BLADE PLACEMENT
1. Blade Guard – Pivot the blade guard front
cover all the way back. The guard tension
spring will keep the front cover in position.
2. Blade Hex Nut – Unscrew the blade shaft
nut (right side loosens clockwise and
tightens counter-clockwise while the left
side
loosens
tightens clockwise. DO NOT overtighten
the nut when finalizing the assembly.
5
condition
of
the
counter-clockwise
and
Advertisement
Table of Contents
