Advertisement
1.Upgrade from USB:
Build UPG file in USB , copy the upgrade file HTB5150.bin to
USB UPG file. then insert USB ,start up DUT enter into HOME
screen ,select Setup >>Advance>> software update >>USB.
When upgrade file detected, select "Yes" to upgrade, select
"No" to cancel.
Once you start upgrade,pls don't power off the DUT,after
upgrade DUT will restart up later a moment time or you press
button "OK" on remote control .
2. Check the version information after upgraded.
Wake up DUT,select Setup >>Advance>>version
information .you will see a interface as below:
Model:HTB5XXX/XX
Software version:
System SW:1.04.00
Subsystem SW:00-17-00-00
3.Factory Reset Steps
Press"Home" button on remote control--->Press"0""3""5""8"--->
Select Restore--->Press"OK" on remote controll
4-1
Software Upgrade
Advertisement
