Description
9
Removing Main board.
•
Gently lift the top right corner of the
board out to release the lock.
•
Use both hands to hold the board and
slide to the left to release it.
CAUTION
When installing the Main board, verify
the board is properly positioned in all 4
mounting slots
* Panel
- Rear Side
1.
Always remember to disconnect the Power Cord before assembling or disassembling the LED TV.
2.
Always take precautions and follow the steps properly. Remember to take a picture before
disassembling if possible.
3.
CAUTION
Recommeded screwdriver torque : 22.0 ~ 26.5lbf
The torque may need to be adjusted accordingly.
-
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
Picture Description
Lift out of locks (top right corners) to release
2
Slide it out toward the left side to remove the board
3. Disassembly and Reassemble
1
3-17