Samsung UE40KU6100W Service Manual page 10

3. Disassembly and Reassemble
Description
4
Insert the Samsung Service Jig at the
indicated positions (Holes) to release
bottom corners of the rear cover.
5
After pushing on coloured points of the
rear cover (in weight less than 10kg) and
inserting a Samsung service jig at holes
of Rear cover's bottom corners, lift up the
rear cover from bottom corners using the
service jig to release the hooks along both
sides of the rear cover.
Then, holding both sides of the rear cover
by hand and releasing the rest hooks on
the upper side of the rear cover, remove it.
All hooks' locations are indicated by Yellow
Circles in the picture.
(Side:8 points / Top:6 points
CAUTION
When you remove the rear cover, hooks
on the upper side of the Chassis Front
can be released. you should check it
before reassembling.
3-6
Picture Description
Jig
Example
BN81-12884A (SVC-JIG)
Jig