3. Disassembly and Reassemble
Description
8
Remove 5 Screws on SMPS Board, and
then remove the board. (Power Cables
were already removed.)
Screws
6001-003016 5EA
TORQUE : 22.0 ~ 26.5lbf
9
Removing Main board.
•
Gently lift the top right corner of the
board out to release the lock.
•
Use both hands to hold the board and
slide to the left to release it.
CAUTION
When installing the Main board, verify
the board is properly positioned in all 4
mounting slots
3-8
Picture Description
Lift out of locks (top right corners) to release
2
Slide it out toward the left side to remove the board
1