How Do I Use The Optional Humiditrol ® Accessory; Enabling And Disabling Humiditrol ® Using Comfortsenset 7000 Thermostat - Lennox Harmony III Homeowner's Manual

How do I use the optional Humiditrol
tion accessory?
NOTE − If your zoned system is equipped with an optional Humidi-
trol dehumidification accessory, see instructions provided with
the Humiditrol Zoning Accessory manual (505,337M) for setting
up zone control and thermostat for operation.
Enabling and Disabling Humiditrol
fortSenset 7000 Thermostat
NOTE − Enabling and disabling Humiditrol
this section, however, if dehumidification is not needed while
on vacation (switch set to vacation on"), a simple way to
keep the system from dehumidifying is to set the thermo-
stat's dehumidify setting as high as it will go. If, however, you
wish to turn Humiditrol
dures.
NOTE − In the INSTALLER SETTINGS, the user can change both
modes and setpoints. However, in USER SETTINGS, the user
can only change setpoints.
- Disable Humiditrol (INSTALLER SETTINGS)
From the OPTIONS screen of the ComfortSenset 7000
thermostat, select INSTALLER SETTINGS and scroll to HU-
MIDITY SETTINGS; press ENTER. Then press DEHUMID-
IFY as shown below.
At the DEHUM MODE SETTING, use the arrows to select
OFF; then press ENTER.
Downloaded from ManualsNet.com
®
dehumidifica-
®
using the Com-
®
is described in
®
on and off, use the following proce-
HUMIDITY SETTINGS
HUMIDIFY DEHUMIDIFY
n|
|
search engine
Press the HOME tab to return to the HOME screen.
- Enable Humiditrol and adjust dehumidification setpoint
(INSTALLER SETTINGS)
From the OPTIONS screen, select INSTALLER SETTINGS.
Scroll to HUMIDITY SETTINGS and press ENTER. Then
press DEHUMIDIFY.
At the DEHUM MODE SETTING, use the arrows to select
HUMIDITROL and press ENTER.
Adjust the dehumidification setpoint; then press SAVE.
When returning from vacation, be sure to return the vacation
switch to VACATION OFF (or ZONING ON).
- Adjust dehumidification setpoint (USER SETTINGS)
From the OPTIONS tab, select USER SETTINGS, then se-
lect HUMIDITY SETTINGS; press ENTER. Press the box
below DEHUMIDIFY.
Page 6
DEHUM MODE SETTING
DEF(OFF) OFF
HUMIDITY SETTINGS
HUMIDIFY DEHUMIDIFY
n|
|
DEHUM MODE SETTING
DEF(OFF) HUMIDITROL
DEHUM SETPOINT
DEFAULT (5O%) 45%
HUMIDITY SETTINGS
HUMIDIFY DEHUMIDIFY
n|
|