Philips 43PUT6504/56 Service Manual page 18

When defective, replace the whole unit.
2
2
(6604/6654 series)
(6784/6794 series)
2
3.2.5 Small Signal Board (SSB)
Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the SSB.
1. Release the clips from the LVDS connector that connect with the SSB[1].
Caution: be careful, as these are very fragile connectors!
2. Unplug all other connectors [2] .