Contents 13.1 Setup Smart TV 1 Get Support 13.2 Smart TV Start Page 1.1 Identify and Register your TV 13.3 App Gallery 1.2 TV Help and User Manual 13.4 Multi View 1.3 On-line Help and User Manual 14 Ambilight 1.4 Consumer Care / Repair 14.1 Ambilight Style 2 Software 14.2 Ambilight Brightness, Saturation...
On-line Help and User Get Support Manual To solve any Philips TV related problem, you can Identify and Register your TV consult our online support. You can select your language and enter your product model number. Identify your TV - TV model number and serial Go to www.philips.com/support.
back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again.
Quick Guide Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote Standby / On control, the batteries might be empty. To switch the TV on or back to Standby. To replace the batteries, open the battery 2 - Playback and Record compartment on the back of the remote control.
2 - SMART TV 4 - SUBTITLE To open the Smart TV start page. To switch subtitles on, off or to show automatically. 5 - Channel Colour keys Direct selection of options. Blue key , opens Help.
3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection. The menu will disappear automatically.
Quick Start Guide that came with the TV. In case you lost this guide, you can download it Turn on TV from www.philips.com. Use the model number of the TV to look for Connect Power Cable the Quick Start Guide to download.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
TV settings when you switch to this device in the Sources menu. If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information on how to connect and which cables to use.
Digital Audio Out - Optical Audio Out - Optical is a high quality sound Composite connection. CVBS - Composite Video is a standard quality This optical connection can carry 5.1 audio channels. connection. Next to the CVBS signal adds the Audio If your device, typically a Home Theatre System Left and Right signals for sound.
With the application you use to start Miracast, you can disconnect and stop watching the screen of the Mobile Device device on TV. The TV will switch back to the last selected programme. Wi-Fi Direct / Miracast From the TV To stop watching the screen of the device on TV, you About Wi-Fi Miracast can .
3. Push the CAM in as far as it will go. Leave it in the favourite app store today. slot permanently. The Philips TV Remote App is available for iOS and When you switch on the TV, it may take a few minutes Android and is free of charge.
formatting. USB Flash Drive Follow the instructions on screen. You can view photos or play your music and videos When the USB Hard Drive is formatted, leave it from a connected USB flash drive. Insert a USB flash connected permanently. drive in one of the USB connections on the TV while the TV is switched on.
formatting. Follow the instructions on screen. 4 - The TV will ask if you want to use the USB Hard Drive to store apps, agree to the question if you do. 5 - When the USB Hard Drive is formatted, leave it connected permanently.
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (up) or (down) and press OK. • To close the source menu without switching to a device, press ...
Channels Re-install all channels (Home) > Settings > Antenna/cable installlation > Search for channels > Reinstall channels About Channels and Switch 1 - Select the country where you are now and Channels press OK. 2 - Select Antenna (DVB-T) or Cable (DVB-C) , and select one item you need to re-install.
Network frequency Digital: Reception Test With the Network frequency mode set to Manual, you can enter the network frequency value received (Home) > Settings > Antenna/cable from your cable provider here. To enter the value, installlation > Digital: reception test use the number keys.
With Channel list copy, you can copy the channels setting, see chapter Re-install channels. Start this installed on one TV onto another Philips TV of the procedure until you reach the country setting. same range. With Channel list copy, you avoid the Press ...
Subtitles Language HbbTV on This Channel If none of the preferred subtitle languages are If you want to avoid access to HbbTV pages on a available, you can select another subtitle language if specific channel, you can block the HbbTV pages for available.
Channel List Options Select Channel Range LIST > OPTIONS > Select channel range Open Option Menu Select a range of channels in a favourites channel To open the channel list option menu... list, once completed, press OK. • Press , to switch to TV. •...
Subtitles from Text Favourite Channels If you tune to an analogue channel, you need to make the subtitles available for each channel About Favourite Channels manually. You can create a favourite channel list that only holds 1 - Switch to a channel and press TEXT to open Text.
• Cycle subpages To cycle subpages when these are available. • Language To switch the group of characters that Text uses to display correctly. • Text 2.5 To activate the Text 2.5 for more colours and better graphics. Text Setup Text language Some digital TV broadcasters have several Text languages available.
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. What You Need Alternatively, you can press ...
Set a Recording You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with ...
Schedule a Recording Recording and You can schedule a recording of an upcoming programme for today or a few days from today Pause TV (maximum of 8 days away). The TV will use the data from the TV Guide to start and end the recording. To record a programme…...
or press (Forward) to select from where you want press OK. 5 - Select the tuner from where you want to record to start viewing the paused broadcast. Press these and press OK. keys repeatedly to change speed. 6 - Select the channel to record from and press OK. To switch back to the actual TV broadcast, 7 - Select the day of the recording and press OK.
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 10.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only.
Video Options During the video playback, press OPTIONS to… Subtitles Display the subtitles if available, select On, Off, or On during mute. Charater set Select one of system for charater. Audio language Play the audio language if available. Status Display file information, like sound mode.
Demo Me Open TV Setting View Demo Me for demo on this TV. Menus 11.3 Quick Settings and All 11.1 Settings Home Menu Overview Quick settings menu: Press (Home) to select one of below menus, then press OK. Press SETUP key on the remote control to find frequently used settings in Quick settings menu.
(Home) > Settings > Picture > Brightness The available Picture styles are ... • Personal - The picture preferences you set during Press the arrows (up) or (down) to set the the first start up • Vivid - Ideal for daylight viewing level of brightness of the picture signal.
Press the arrows (up) or (down) to set a non- Contrast Settings linear setting for picture luminance and contrast. Contrast Modes (Home) > Settings > Picture > Ultra Resolution Advanced > Contrast > Contrast mode (Home) > Settings > Picture > Advanced > Sharpness >...
(Home) > Settings > Picture > Quick Picture Settings Advanced > Computer > On • (Home) > Settings > Picture > Picture style > (Home) > Settings > Picture > Quick picture settings Game. • During the first installation, you did some picture •...
select HDMI sound system. The TV will switch off Headphone Volume the TV speakers when the device is playing the sound. (Home) > Settings > Sound > Headphone volume Press the arrows (up) or (down) to adjust the Clear Sound volume of a connected headphone separately.
Digital out offset (Only available when Digital out General Settings delay set to On) (Home) > Settings > Sound > Connection Related Settings Advanced > Digital out offset USB Hard Drive • If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound.
(Home) > Settings > General Location - Home or Shop settings > EasyLink > EasyLink > On (Home) > Settings > General settings > Location Operate HDMI CEC-compatible devices with TV • Select the location of your TV remote control •...
(Home) > Settings > Region and Channel Logos language > Language > Primary text, Secondary text (Home) > Settings > General settings > Advanced > Channel logos Some digital TV broadcasters have several Text languages available. In some countries, the TV can show the channel logos.
to 0 minutes, the sleep timer is switched off. You can Lock Settings always switch off your TV earlier or reset the time during the countdown Set Code and Change Code (Home) > Settings > Child lock > Set Universal Access Settings code, Change code Set new code or reset change code.
If you have devices in your wireless network that use the WEP To enjoy the full capabilities of your Philips Smart TV, security encryption system, you cannot use WPS. your TV must be connected to the Internet.
Memory (Home) > Settings > Network > Static IP configuration With Clear Internet Memory you clear your Philips server registration and parental rating settings, your 1 - Select Static IP configuration and configure the video store app logins, all Philips App Gallery connection.
- Internet pages are shown one page at a time and full screen. Recommended Apps In this window, Philips presents a range of recommended Apps for your country, Apps for Online TV or a selection of rental movies from Video stores.
• Fresh nature - Green colour variations 2 - Select Start now and press OK. The TV will search for the Philips Hue Bridge. If the TV is not yet • Warm white - Warm white colour variations connected to your network, the TV will start the •...
Switch off Ambilight+hue 2 - Select Start and press OK. 3 - Now go to the Philips Hue Bridge and press the link button in the middle of the device. This will link (Home) > Settings > Ambilight > Ambilight + the Hue Bridge with the TV.
• Select the colour of the wall behind the TV and the TV will modify the Ambilight colours to appear as they are intended. TV switch off (Home) > Settings > Ambilight > Advanced > TV switch off Set Ambilight to switch off immediately or slowly fade out when you switch off the TV.
Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
1 year. You quality materials and components, which can be can also find the power consumption values for this recycled and reused. product on the Philips website for your country at www.philips.com/TV 16.2 Product Fiche...
Please find out for yourself about the local rules on separate collection of batteries because correct disposal will help to prevent negative consequences for the environment and human health.
Video support timing also includes field/frame rate Product specifications are subject to change without 23.976Hz, 29.97Hz and 59.94Hz. notice. For more specification details of this product, www.philips.com/support Power HDMI • Mains power : AC 220-240V +/-10% • Ambient temperature : 5°C to 35°C •...
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual.
Press Settings > Help > Check the TV. • Check if the TV was connected with an antenna. If the video clip stays black, call Philips. Wait until the Check the cable connections. clip ends and select Contact info in the Help menu.
or connected computer, the sound from your Home • Make sure that the device is connected properly. Theatre System might be distorted. This noise is heard Make sure that the device's output video setting is the when the audio or video file has DTS sound but the highest possible resolution if applicable.
press the colour key Keywords and look up Multimedia. Choppy playback of USB files • The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback. 18.9 Wi-Fi and Internet Wi-Fi network not found or distorted •...
The remote control may contain coin-type batteries from the power outlet immediately. which can easily be swallowed by small children. Contact Philips TV Consumer Care to have the TV Keep these batteries out of reach of children at all checked before use.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours.
TP Vision is the warrantor in relation to the targeted at consumers which, like any electronic TV with which this booklet was packaged. Philips and apparatus, in general have the ability to emit and the Philips Shield Emblem are registered trademarks receive electromagnetic signals.
21.4 Dolby Audio Copyrights Manufactured under license from Dolby Laboratories. 21.1 Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC. 21.5 DTS 2.0 + Digital Out ™...
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 22.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software.
The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.