Front Panel Block-2 - Sony GTK-XB60 Service Manual

GTK-XB60

2-16. FRONT PANEL BLOCK-2

Note 1: Make sure to proceed with the top and bottom
sides first because the right and left sides may
damage the sides of the front panel block.
bottom side
2 Insert a thick screwdriver into the right side
and widen the gap (perform at two places).
Note 2: Be careful because if a screwdriver is
inserted too far in, the speaker unit (WF)
may get damaged.
4 front panel block
Note 3: When installing the front panel block
remove the used bond and use a new
bond to fix the front panel block.
3 Remove the front
panel block in the
direction of the
arrow.
Note 5: This boss excludes US
and CND models.
16
front panel block
right side
1 Insert a thick screwdriver into the left side
and widen the gap (perform at two places).
Note 2: Be careful because if a screwdriver is
left side
wood cabinet
top side
Note 6: The number of boss holes varies depending
on the destination.
top side
US, CND
total ten bosses
No
boss
hole.
bottom side
tweeter cable
Note about installing the front panel block
Note 4: When installing the front panel block,
FFC
(TOP LED-MAIN)
front panel block
woofer cable
wood cabinet
inserted too far in, the speaker unit (WF)
may get damaged.
Except US, CND
total eleven bosses
– Front view –
be careful not to pinch the three cables.
FFC
(TOP LED-MAIN)
tweeter cable
– Top view –
woofer cable
With
boss
hole.