Philips BT9295 User Manual page 13

Question
Is the laser light harmful
to my eyes?
I cannot turn the
trimming head. Why?
Can I clean this appliance
under a running tap?
Why doesn't the comb
What is the difference
between the combs?
Why can't I see the laser
light?
Why can't I see the hairs
when I use the laser
guide?
How long does it take
to charge the appliance
session?
Frequently asked questions
Answer
the light directly into your eyes.
You have to push the laser guide to 'off ' position before you can turn the
trimming head.
The appliance is watertight and you can clean it under a running tap with
lukewarm water.
advise you not to rinse the appliance under the tap.
The combs can only be used when the wide side of the trimming head
side of the trimming head points towards the front of the appliance. Turn the
trimming head to normal trimming position and then slide the comb onto it.
push the laser guide to 'off ' position.
The standard comb is most suitable for trimming your beard to an even
length. The precision comb is especially suitable for trimming hard-to-reach
The laser guide is in 'off ' position. Switch on the laser guide by pressing the
top of the laser guide.
You switched off the appliance with the laser guide still popped up.
the laser guide by pressing the top of the laser guide.
You are using the appliance in a room or area where the light is very bright.
Move to a room or area where the light is less bright.
You are probably using the appliance in a room or area that is too dark.
Switch on the light in the room or go to a room or area where there is
more light.
This appliance has a quick-charge function. When the appliance starts
ENGLISH
13