Table of Contents
Advertisement
Setup
Charging Time
The camera will take approximate 4 hours minutes to fully charge.
A full charge will last approximately up to 8 hours.
Standard Seat Mounting
The camera is mounted to the bicycle seat pole. To fit the camera, first take the
C
mounting strap
C 4
adjust the strap
mounting bracket
pull firmly and fix into place.
C
1
10.
1
and place the mounting bracket against the seat post. Next
so that the rear mount
C
1
. Thread the velcro strap
C 2
is on the opposite side to the
C 4
through the strap loop
1
3
4
C 3
,
2
Advertisement
Table of Contents
