Setup; Charging The Camera - bikemate BLR-12 User Manual

Rear bike camera with light
Table of Contents

Advertisement

Setup

Setup
This product has the micro SD card pre-formatted and pre-installed for your
convenience. It is recommended that you fully charge the product before use for the
best first time experience.

Charging The Camera

B 1
To charge the camera, lift the dust cover
and connect the mini USB end of the
B 2
supplied charge cable
. Connect the other end of the charge cable to an
appropriate 5V/1A DC out port on a USB main adaptor.
B
2
2
1
Read the information label on the USB adaptor before use.
DO NOT USE Mains USB Outlets
This will harm the battery and/or void
the product's warranty.
9.

Advertisement

Table of Contents
loading

This manual is also suitable for:

710418

Table of Contents