1. Assembling the Base
Never
Overtighten
Screws
1) Insert Right Leg C into Middle Base A. Align the holes in the Right Leg to the holes in the Middle Base.
Secure with Screws Q and Allen Wrench Y. Repeat this step for Left Leg B.
2) Each caster can be adjusted independently for fine tuning. Slightly turn the nut with Wrench Z to lower or
raise Middle Base.
2. Attaching the Column to the Base
CAUTION: Hold the inner column
when loosening the screws to adjust
height.
Adjust inner Column J to the desired height, then tighten all screws.
Q
Y
Z
Y
4
A-1
Y