Table of Contents
Advertisement
1. Assembling the Base
1) Insert Right Leg C into Middle Base A. Align the holes in the Right Leg to the holes in the Middle Base.
Secure with Screws Q and Allen Wrench Y. Repeat this step for Left Leg B.
2) Each caster can be adjusted independently for fine tuning. Slightly turn the nut with Wrench Z to lower or
raise Middle Base.
2. Attaching the Column to the Base
CAUTION: Hold the inner column
when loosening the screws to adjust
height.
Adjust inner Column J to the desired height, then tighten all screws.
18-06-223-9336AF-EN.indd 4
Q
Y
Y
4
Z
Y
6/15/2018 2:38:23 PM
Advertisement
Table of Contents
