WilTec 63021 User Manual page 11

Step 3:
Put the gas cylinder housing over the post from
above and place it on the stand.
Step 4:
1. Remove the 4 bolts from the burner.
2. Push the gas hose through the post from above.
3. Fix the burner unit to the post by the 4 bolts.
Step 5:
1. Check if the connection of the post and burner
are assembled according to instructions, and all
bolts and nuts are tightened.
2. Put 6 large flat washers on the 3 reflector spac-
ers.
Step 6:
Fasten the reflector with 3 large flat washers and
3 wing nuts.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 63021 Page 11
01 2022-1