Advertisement
Hardware contents
M8 flange nut
M8×16 bolt (5×)
(2×)
⌀8 washer (9×) ⌀6 washer (9×)
Assembly
Step 1:
1. Put the 3 post brackets on each position on the
stand as shown.
2. Use 3 M8×16 bolts for connecting.
Step 2:
1. Put the post on the top of the post brackets.
2. Use 6 large M6 bolts and counter-nuts to con-
nect the post to the post brackets. Tighten the bolts
and nuts.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
M6 flange nut
Stainless steel
(6×)
bolt (4×)
M6×10 screw
Cap nut (9×)
(9×)
Item 63021
M6×30 bolt
Reflector
(6×)
spacer (3×)
Wing nut (3×)
Wrench (1×)
Page 10
01
2022-1
Advertisement
