XR1770AU SPECIFICATIONS
Power System
Full Charge Time
Cordless Shave Time
Quick Charge
LED Display
Voltage Type
Waterproof
Replacement Head & Cutters
Power System: Cordless – shaver can only be used without the power
cord. The shaver will not run while it is charging.
Quick Charge: A 5 minute quick charge will allow for 3 minutes of shaving.
Voltage Type: This product is supplied with a USB charging cable. Use this
cable to charge from a standard USB charging source.
CHARGING
•
It is recommended to fully charge your appliance before using it for
the first time.
•
Ensure the product is switched off.
•
Connect the product to the USB cable and then connect the USB end
of the cable to a powered USB port.
CHARGING INDICATOR LIGHTS
•
The bottom two (red) lights show charging status during charging.
When the charging level is below 50%, the bottom light will fade on
and off. When charging is over 50%, the bottom light will stay on and
the next light will fade on and off. Once charging is complete, the
green light will turn on briefly, then switch off.
•
If your shaver does not run when you switch it on, and the bottom two
leds flash rapidly for 5 seconds, your shaver needs charging.
•
Run time from fully charged is up to 60 mins.
•
Charge time from empty is 90 minutes.
•
Do not recharge your product after each use as this will shorten the
life of the battery.
Cordless
90 Minutes
60 Minutes
Yes (5 Minutes)
3 stage LED indication
USB
Yes
SP-X7-BA
5