Geneinno GTP exCAM-1 User Manual page 7

Record settings
© 2020-2022 GENEINNO All Rights Reserved
l Record resolution:
Set in 4K or 1080P.
l Video coding:
Support video coding in H265/H264, video
saved as MP4 format by default.
l File time length:
Range from 0-30min, unsegmented
division when time length is 0
l Video bit rate:
Range from 5MB to 20 MB. Video bit rate
could impact video file size and record
quality.
l OSD：
Set watermarks in photos and videos.
Watermarks are enabled by default. Could
disable them by clicking the icon to dark. It
is on when the icon is highlighted.
l Album: Open the ROV and external camera
albums
l Auto-balance: Enable/disable auto balance
l Compass calibration: start compass
calibration
l Environment setting: the option for fresh/salt
water, select salt water or fresh water, which
has effect on depth accuracy only
l US/Japan hand switch：US/Japan hand
control mode switch
l Unit setting: set unit to the Metric system or
British System
l More info: more information display
l User guide: user guidance for starters
l Firmware version: firmware version display
l Storage: display of ROV storage status in the
machine
l Restore to factory settings: restore machine
to factory settings
6