Viewing Min/Max Temperatures; Resetting Min/Max Temperatures - Labcold IntelliCold RLDF/G 19 Operating Instructions Manual

Min/Max Temperatures
To view your high/low temperature make the icons/buttons are visible by putting your hand
on the controller as described in page 6. Touch the high/low icon
will display the minimum and maximum temperatures recorded by probe
to2
process for probe (if
relate to because to1 or
H/L
P
H/L
P
After showing the temperatures, the controller will revert to the normal display and the icons/
buttons cease to be active.
The temperatures recorded by the two probes may differ because they are taking readings

from different parts of the fridge, especially if probe
Min/Max Reset
To reset the minimum/maximum temperatures to conform with DH Green Book Guidance
page 29-30, hold the high/low
icon/button until the display reverts to the normal temperature screen and the minimum/
maximum temperatures will be reset. Repeat this for probe
don't want to reset the temperatures, touch the mute icon/button and you will be returned to
the normal temperature display.
enabled). You can tell which probe the high and low temperatures
to2 will display above the temperature.
H/L
t ° 1
P
° t 1
H/L
°
C
P
t ° 2
° t 1
H/L
° C
P
icon/button until
H/L
H/L
P
and the controller
H/L
to1
° C
H/L
P
H/L
P
to2
is placed in a simulated load.
CFП
flashes on the display.
to2
(if enabled). However, if you
12
and repeat this
° t 1
H/L
°
C
P
2
° t 1 t °
H/L
°
C
P
Hold the tick