easymaxx 00310 Instruction Manual page 22

EN
1. Remove the protective fi lm from the ad-
2. Use the adhesive tape to stick the article
3. Move the On / Off switch on the side
4. Move the On / Off switch to the OFF po-
0_DE-EN-FR-NL_A6_V1.indb 22 0_DE-EN-FR-NL_A6_V1.indb 22
hesive tape on the back of the article.
to a clean pane of glass that is free of
any dust or grease.
of the article to the ON position. The
alarm is activated after around 10 sec-
onds. If somebody attempts to smash
the glass pane, a warning signal sounds
for around 30 seconds. The alarm then
continues to be activated.
sition to stop the warning signal or to de-
activate the alarm.
Carry out tests regularly in order to
ensure that the article is working cor-
rectly! If the warning signal can only
be heard faintly, change the batteries.
22
12.12.2016 13:39:49 12.12.2016 13:39:49