Siemens EX LX User Manual page 13

13 Keep-warm function
You can use this function to melt chocolate or butter
and to keep meals warm.
13.1 Switching on Keep-warm function
1.
Press ​ ⁠ .
2. Select the required cooking zone within the next
10 seconds.
​ ⁠ lights up.
a The functions starts.
14 fryingSensor
Suitable for cooking or reducing sauces, pancakes or
frying eggs with butter, for frying vegetables or steaks
up to the required level of boiling, and for keeping the
temperature under control.
Instead of frequently adjusting the power level during
cooking, select the required target temperature once at
the start. The sensors under the glass ceramic meas-
ure the temperature of the cookware and keep this
constant throughout the entire cooking process.
This function is available on all cooking zones marked
with this symbol
14.1 Advantages
¡ The temperature is automatically kept constant
without you having to change the power level.
¡ Oil does not overheat. This prevents the food from
burning.
¡ The cooking zone only continues heating for as long
as this is necessary to maintain the temperature.
This saves energy.
14.2 Temperature levels
Temperature levels for preparing meals.
Level Temper- Functions
ature
1 120 ºC Boiling and reducing
sauces, fry veget-
ables
2 140 ºC Searing in olive oil or
butter
3 160 ºC Frying fish and
coarse foods
4 180 ºC Deep-fat frying
breaded, frozen and
grilled food
5 215 ºC High-temperature grill
and griddle plate
​ ⁠ .
Cookware
13.2 Switching off Keep-warm function
1.
Touch ​ ⁠ .
2. Select the cooking zone.
​ ⁠ goes out.
The cooking zone switches itself off and the residual
heat indicator lights up.
a The function has been deactivated.
14.3 Recommended cookware
Special cookware has been developed for this function,
which delivers the best results.
Cookware
Frying pan, 15 cm dia-
meter
Frying pan, 19 cm dia-
meter
Frying pan, 21 cm dia-
meter
Teppanyaki ​ ⁠
Grill ​ ⁠
The recommended cookware is available from cus-
tomer service, specialist retailers or our online shop
www.siemens-home.bsh-group.com .
Note: You can also use other cookware. Depending on
the composition of the cookware, the achieved temper-
ature may differ from the selected temperature level.
14.4 Switching on the fryingSensor
1.
Place empty cookware on the cooking zone.
2. Touch ​ ⁠ and then select the cooking zone.
3. Within the next 10 seconds, select the required tem-
perature setting on the control panel.
a The functions starts.
get temperature is reached.
a Once the target temperature has been reached, a
signal tone sounds and
4.
Add the frying fat and then the food to the frying
pan.
Note: If you need to cook with more than 250 ml oil,
add the oil and wait a few seconds before you add the
food.
14.5 Switching off fryingSensor
▶
Select the cooking zone and touch
a The function has been deactivated.
Keep-warm function en
Recommended cooking
zone
Single cooking zone
Single cooking zone
Single cooking zone
Flex Zone
Flex Zone
​ ⁠ flashes until the set tar-
​ ⁠ stops flashing.
​ ⁠ .
13