Siemens EX LX User Manual page 10

en flexInduction
8 flexInduction
The flexible cooking zone allows you to position cook-
ware of any shape or size any way you like. It consists
of four inductors that work independently of each other.
When the flexible cooking zone is in use, only the area
that is covered by cookware is activated.
8.1 Positioning the cookware
The flexible cooking zone can be configured in two
ways, depending on which cookware is used. In order
to guarantee good thermal detection and heat distribu-
tion, we recommend positioning the cookware in the
centre, as shown in the figures.
As a connected cooking zone
Recommended for cooking with just one item of cook-
ware.
¡ Position the cookware depending on the size:
¡ Recommended oblong cookware
As two separate cooking zones
Recommended for cooking with two items of cook-
ware.
10
You can use the front and rear zone independently of
one another, and set a separate power level for each
zone.
Caution
Do not place cookware in the middle between the right
and left zones. The cooking zones are not activated
correctly and you do not achieve a good cooking res-
ult.
​ ⁠ :
8.2 flexInduction disconnecting
By default, the cooking zone is configured in such a
way that the two cooking zones are connected to each
other. To separate the cooking zones:
1.
2.
a The display lights up. The FlexZone is disconnected.
Notes
¡ You can change the default setting for the flexible
¡ If you move or lift the item of cookware onto the act-
8.3 flexInduction connect
▶
a The cooking zones are connected to each other
Select one of the two cooking zones.
Press ​ ⁠ .
cooking zone. You can find out how to do this in the
"Basic settings" section → Page 15.
ive cooking zone, the cooking zone automatically
starts searching and the power level you selected
previously is retained.
Touch ​ ⁠ .
and continue to work together.