Siemens EX LX User Manual page 12

Table of Contents

Advertisement

en powerBoost
10.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the cooking zones.
Switching on Timer
1.
Touch
​ ⁠ .
​ ⁠ and
​ ⁠ light up.
a
2.
Set the required time in the settings area.
3.
Press
​ ⁠ to confirm.
a The time begins to count down.
a An audible signal sounds and the displays flash
once the time has elapsed.
Changing or switching off the Timer
1.
Touch
​ ⁠ .
11  powerBoost
You can use this function to heat up large volumes of
water more quickly than with ​ ⁠ .
This function is available for all cooking zones,
provided the other cooking zone in the same group is
not in use.
11.1 Switching on powerBoost
12  shortBoost
You can use this function to heat up pans more quickly
than with ​ ⁠ .
This function is available for all cooking zones,
provided the other cooking zone in the same group is
not in use.
12.1 Recommended applications
¡ Do not place a lid on the pan.
¡ Never leave pans unattended when they are heating
up.
¡ Only use cold pans.
12
2.
In the settings range, change the time or set to
to delete the time.
3.
Press
​ ⁠ to confirm.
10.3 countUp function
The stopwatch function displays the time that has
elapsed since activation.
Switching on countUp function
Touch
​ ⁠ .
​ ⁠ light up.
a
a The time begins to count down.
Switching off countUp function
Touch
​ ⁠ .
a The displays for the run time programming function
go out.
a The function has been deactivated.
1.
Select the cooking zone.
2.
Touch ​ ⁠ . The ​ ⁠ display lights up.
a The function is switched on.
Note: You can also switch on this function when cook-
ing with a connected FlexZone.
11.2 Switching off powerBoost
1.
Select the cooking zone.
2.
Touch ​ ⁠ . The ​ ⁠   display goes out and the cooking
zone switches back to the ​ ⁠ power level.
a The function has been deactivated.
Note: In certain circumstances, this function may
switch itself off automatically in order to protect the
electronic elements inside the hob.
¡ Use pans with a completely flat base. Do not use
pans with a thin base.
12.2 Switching on shortBoost
1.
Select the cooking zone.
2.
Touch ​ ⁠   twice.
​ ⁠ lights up.
a The function is switched on.
Note: You can also switch on this function when cook-
ing with a connected FlexZone.
12.3 Switching off shortBoost
1.
Select the cooking zone.
2.
Touch ​ ⁠ .
​ ⁠   goes out and the cooking zone
switches back to the ​ ⁠ power level.
a The function has been deactivated.
Note: To avoid high temperatures, this function auto-
matically switches itself off after 30 seconds.
​ ⁠

Advertisement

Table of Contents
loading

Table of Contents