Lifetime DOUBLE ADVENTURE 90971 Assembly Instructions Manual

page of 120

/ 120
Contents
Table of Contents
Bookmarks

Quick Links

Download this manual

DOUBLE ADVENTURE

TOWER

MODEL #60091

MODEL 90971

BEFORE ASSEMBLY:

• Before you start, prepare a level surface with the proper

Safety Zone (see page 12).

• 3+ adults recommended for setup.

• Inspect all parts and hardware. Ensure all are

included using the Parts Identifier in the middle of

these instructions. The Parts Identifier , in yellow, can

be removed from the instructions for quick reference.

WARNING: Only for domestic use.

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

TOOLS REQUIRED (NOT INCLUDED-UNLESS INDICATED OTHERWISE)

1/2" (≈13 mm)

(1)

(3)

ADDITIONAL ASSEMBLY HELP

ASSEMBLE IT WITH THE FREE BILT INTELLIGENT

INSTRUCTIONS APP

IN THE APP, SCAN OR SEARCH #1206643

QUESTIONS?

CONTACT LIFETIME CUSTOMER SERVICE:

Call: 1-800-225-3865

7:00 am-5:00 pm (Monday-Friday) MST

and 9:00 am-1:00 pm Saturday MST

(English, French, Spanish)

1/4" (≈7 mm)

7/16" (≈11 mm)

(1)

3/8" (≈10 mm)

(3)

(1, included)

Live Chat: www.lifetime.com/customerservice

(click on "LIVE CHAT" tab)

For customer service in mainland Europe:

E-mail: cs@lifetimeproducts.eu

ASSEMBLY INSTRUCTIONS

Pour le français, voir la page 2. Para el español, ver la página 3.

3/16" (≈5 mm)

(2, included)

(1)

Icon legend.................................4

Warnings and notices...................5

Safety information.....................6

Safe play area...........................12

Spare hardware bag...................13

Tower 1 frame assembly.............14

Tower 1 deck assembly..............32

Tower 1 roof assembly..............48

Tower 1 walls assembly..............60

Tower 1 climber & slide

assembly..........................71

Tower 2 frame assembly............81

Parts identiﬁ er.........................i-viii

Tower 2 deck assembly...............99

Tower 2 roof assembly............113

Tower 2 walls assembly............125

Tower 2 climber, slide & swing

assembly......................136

Tower bridge assembly.............148

Anchor kit installation..............158

Maintenance.........................163

Registration..........................166

Warning sticker.......................167

Warranty.............................169

MODEL# AND PRODUCT ID

(you will need both when contacting us)

Model Number: 90971

Product ID:

Chapters

Need help?

Do you have a question about the DOUBLE ADVENTURE 90971 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lifetime DOUBLE ADVENTURE 90971

Page 1: Table Of Contents
Warranty......169 ASSEMBLE IT WITH THE FREE BILT INTELLIGENT INSTRUCTIONS APP IN THE APP, SCAN OR SEARCH #1206643 QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: Call: 1-800-225-3865 Live Chat: www.lifetime.com/customerservice MODEL# AND PRODUCT ID (you will need both when contacting us) (click on “LIVE CHAT” tab) Model Number: 90971 7:00 am–5:00 pm (Monday–Friday) MST...
Page 2 Garantie......170 DANS L’APPLI, SCANNER OU CHERCHER #1206643 ® QUESTIONS ? CONTACTEZ AUX SERVICES À LA CLIENTÈLE LIFETIME Composer le 1-800-225-3865 Chat en direct: www.lifetime.com/customerservice N° DE MODÈLE ET RÉFÉRENCE DU PRODUIT (vous aurez besoin des deux lorsque vous nous contactez) (cliquer sur la languette «...
Page 3 Autoadhesivo de advertencia..167 Garantía......171 EN LA APP, ESCANEAR O BUSCAR #1206643 ® ¿PREGUNTAS? PÓNGASE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME Chat en vivo: www.lifetime.com/customerservice Llamar : 1-800-225-3865 MODEL E ID DEL PRODUCTO (necesitará los dos al contactarnos) (cliquee en la lengüeta «LIVE CHAT») Número de modelo: 90971...
Page 4: Icon Legend
ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Ceci indique que vous devez faire attention à ce que vous lisez. • Indica que uno debe prestar atención al leer. •...
Page 5: Warnings And Notices
WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system. To ensure safety, do not attempt to assemble this product without following the instructions carefully.
Page 6: Safety Information
IMPORTANT SAFETY INFORMATION PLEASE READ BEFORE BEGINNING ASSEMBLY INSTALLATION & GROUND PREPARATION INSTRUCTIONS • Place the equipment on a level, well-drained ground, not less than 6.6 ft (2.0 m) from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. •...
Page 7 CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS* Select Protective Surfacing—One of the most important things you can replenish and/or redistribute the surfacing. do to reduce the likelihood of serious head injuries is to install shock- Do not install loose ﬁ ll surfacing over hard surfaces such as concrete or absorbing protective surfacing under and around your play equipment.
Page 8 **INFORMATIONS DE SÉCURITÉ IMPORTANTES** VEUILLEZ LIRE AVANT DE COMMENCER L’ASSEMBLAGE : INSTRUCTIONS D’INSTALLATION ET DE PRÉPARATION DE TERRAIN • Placez l’équipement sur un terrain de niveau et bien drainé, à plus de 2,0 m (6.6 pi) de toute structure ou obstruction telle qu’une clôture, un garage, une maison, des branches basses, des cordes à...
Page 9 FEUILLE D’INFORMATION AU CLIENT POUR LES MATÉRIAUX DE SURFAÇAGE DE TERRAIN DE JEU* Sélectionner une surface protectrice—L’une des choses les plus importantes Vériﬁ er and maintenir la profondeur du matériel protecteur de surface que vous puissiez faire pour réduire la probabilité de blessures graves à en vrac.
Page 10: Información Sobre La Seguridad
**INFORMACIÓN DE SEGURIDAD IMPORTANTE** LEA POR FAVOR ANTES DE INICIAR EL ENSAMBLE: INSTRUCCIONES DE INSTALACIÓN Y DE PREPARACIÓN DEL PISO • Coloque el equipo sobre un piso nivelado, bien drenado, a no menos de 2.0 m (6.6 pies) de cualquier estructura u obstrucción como una cerca, cochera o una casa, ramas que cuelgan, lazos para tender ropa o cables eléctricos.
Page 11 HOJA DE INFORMACIÓN DEL CONSUMIDOR PARA LOS MATERIALES DE REVESTIMIENTO SUPERFICIAL DEL EQUIPO DE PATIO DE RECREO* Seleccionar la superﬁ cie protectora—Una de las cosas más importantes los daños por agua. que uno puede hacer para disminuir la probabilidad de lesiones graves Veriﬁ...
Page 12: Safe Play Area
SAFE PLAY AREA / ZONE DE SÉCURITÉ / ZONA DE SEGURIDAD SAFETY ZONE — Place the equipment no less than 6.6 ft. (2 m) from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. Make sure the clear- ance in front of and behind the swings is at least twice the height of the swing bar.
Page 13: Spare Hardware Bag
SPARE HARDWARE BAG / SAC SUPPLÉMENTAIRE DES QUINCAILLERIE / BOLSA SUPLEMENTARIA DE HERRAJE Spare hardware bag / Sac supplémentaire des quincaillerie Bolsa suplementaria de herraje GCI (x2) EAK (x2) DXZ (x2) AUH (x2) DSA (x2) GCJ (x2) DXX (x2) DZR (x2) ASI (x2) FEH (x2) ARX (x2)
Page 14: Tower 1 Frame Assembly
TOWER 1 FRAME ASSEMBLY / TOUR 1 ASSEMBLAGE DE LA STRUCTURE ENSAMBLE DEL BASTIDOR DE LA TORRE 1 • The two towers look similar and share similar parts but not all parts are the same. Take special caution to identify the correct parts before assembly. •...
Page 15 TOWER 1 FRAME ASSEMBLY / TOUR 1 ASSEMBLAGE DE LA STRUCTURE ENSAMBLE DEL BASTIDOR DE LA TORRE 1 HARDWARE REQUIRED / QUINCAILLERIE REQUIS / HERRAJE REQUERIDO CONTENTS OF BOX 8 / CONTENU DE LA BOÎTE 8 CONTENIDO DE LA CAJA 8 Hardware blister pack / Plaquette des quincaillerie Blíster de herraje...
Page 16 TOWER 1 FRAME ASSEMBLY / TOUR 1 ASSEMBLAGE DE LA STRUCTURE ENSAMBLE DEL BASTIDOR DE LA TORRE 1 PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS CONTENTS OF BOX 3 / CONTENU DE LA BOÎTE 3 CONTENIDO DE LA CAJA 3 Parts bag / Sac des pièces Bolsa de piezas...
Page 17 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ASI (x1) AAN (x1) • Ensure you orient the short deck support tube (DWS) as shown. Attach two angled deck supports (DWU) to the small deck support tube.
Page 18 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ASI (x5) AAN (x5) • Repeat step 1.1 to attach the remaining two angled deck supports (DWU) to the second small deck support tube (DWS). The dimpled holes on the angled deck supports (DWU) face upward.
Page 19 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • There are three main legs (GBR) poles and one tower bridge pole (GCN). The tower bridge pole (GCN) pole goes on the side of the tower that holds the bridge, closer to the slide rather than the climber.
Page 20 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x1) BTS (x1) • Secure the foot cap (DZO) to the tower bridge pole (GCN) with the hardware indicated. •...
Page 21 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Deck orientation is extremely important! Make sure the angled deck supports (DWU) are oriented as shown, with the dimpled holes on the angled deck supports facing downward, toward the foot cap (DZO).
Page 22 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) AUH (x1) AAN (x1) CVZ (x1) DXZ (x1) BTS (x1) •...
Page 23 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) AUH (x1) AAN (x1) • Secure the side of the tower bridge pole (GCN) with the hardware indicated. •...
Page 24 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS DXZ (x1) CVZ (x1) BTS (x1) • Place and attach the ﬁ rst two wall support braces (DWZ) with the hardware indicated. Only ﬁ nger-tighten this hardware at this time.
Page 25 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ARX (x2) AAN (x2) 1.10 • Bend the braces (DWZ) toward the deck frame to align the holes. The braces are designed to be bent by hand. Attach the braces with the hardware indicated.
Page 26 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x3) BTS (x3) 1.11 • Secure foot caps (DZO) to the three remaining tower poles (GBR) with the hardware indicated. •...
Page 27 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) CVZ (x2) 1/2 in/po (≈13 mm) AUH (x2) AAN (x2) DXZ (x2) BTS (x2) 1.12 •...
Page 28 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) ARX (x6) AUH (x4) CVZ (x4) 1/2 in/po (≈13 mm) DXZ (x4) BTS (x4) AAN (x10) 1.14 1.15...
Page 29 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x3) BTS (x3) 1.16 • Secure the tower extensions (EMM) to the tower poles (GBR) with the hardware shown. Line up the holes in the Pole extension with the holes in the tower poles.
Page 30 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x4) BTS (x4) 1.18 • Attach three of the handrails (DXE) to the tower frame with the hardware indicated. Roll the tower frame over to make it easier to attach the handrails as long as the unit is on a soft surface, such as grass or cardboard.
Page 31 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 1.19 • Align the holes in the pole caps (DWR) with the holes in the tower poles, and insert the caps. •...
Page 32: Tower 1 Deck Assembly
TOWER 1 DECK ASSEMBLY / TOUR 1 ASSEMBLAGE DU PONT / ENSAMBLE DE LA CUBIERTA DE LA TORRE 1 HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO CONTENTS OF BOX 8 / CONTENU DE LA BOÎTE 8 CONTENIDO DE LA CAJA 8 Hardware blister pack / Blister de quincaillerie Blíster de herraje...
Page 33: Ensamble De La Cubierta De La Torre 1
TOWER 1 DECK ASSEMBLY / TOUR 1 ASSEMBLAGE DU PONT / ENSAMBLE DE LA CUBIERTA DE LA TORRE 1 PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS CONTENTS OF BOX 6 / CONTENU DE LA BOÎTE 6 CONTENTS OF BOX 4 / CONTENU DE LA BOÎTE 4 CONTENIDO DE LA CAJA 6 CONTENIDO DE LA CAJA 4...
Page 34 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) • Using a 3/8 in (10 mm) drill bit, drill the Deck at the eleven locations indicated. Ensure you drill down from the top- side.
Page 35 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Slide the deck (DYB) onto the deck frame at an angle, then lower the deck into position. Repeat for the other side. The deck panels interlock.
Page 36 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x2) BTS (x2) CVZ (x2) • Attach the deck panels (DYB) onto the deck frame with the hardware indicated. •...
Page 37 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXX (x1) DXS (x2) BTS (x3) • Attach the ﬁ rst handrail support (DXI) with the hardware indicated. Placement of the handrails is very important! Be sure to orient the correct handrail supports in the correct placement on the deck.
Page 38 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXX (x1) DXS (x2) BTS (x3) • Repeat step 2.4 for the remaining handrail support (DXI). •...
Page 39 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXS (x2) DXX (x1) BTS (x3) • Attach the handrail support (DXO) with the hardware indicated. •...
Page 40 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS CUZ (x12) CVZ (x12) • Secure with the hardware shown into each of these 12 locations. • Attache à la’de de la quincaillerie indiquée dans chaque un de ces 12 emplacements. •...
Page 41 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) BTS (x4) DXZ (x4) • The correct rail handles (DXF) for this step are marked with an “A”. •...
Page 42 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXX (x6) BTS (x6) 2.10 • The correct rail handle (DYA) for this step is marked with a “B”. •...
Page 43 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x3) BTS (x3) 2.12 • Place the hardware indicated above in the three main support legs (DWY) in the second hole down from the short brace.
Page 44 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x4) EBT (x4) DXX (x2) BTS (x6) CVZ (x4) 2.13 • Place the metal barrier (DZW) against the deck frame with the hardware indicated. •...
Page 45 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) 2.15 • Drill 3/8 in (10 mm) holes through the two plastic barriers (DYC) in the locations shown. •...
Page 46 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) (x1) 1/2 in/po (≈13 mm) ARN (x2) 3/8 in/po (≈10 mm) AAN (x2) CVZ (x2) 2.16 •...
Page 47 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) (x1) 1/2 in/po (≈13 mm) DXS (x4) BTS (x4) 3/8 in/po (≈10 mm) CVZ (x6) AAN (x2) ARN (x2)
Page 48: Tower 1 Roof Assembly
TOWER 1 ROOF ASSEMBLY / TOUR 1 ASSEMBLAGE DU TOIT / ENSAMBLE DEL TECHO DE LA TORRE 1 HARDWARE REQUIRED / QUINCAILLERIE REQUIS / HERRAJE REQUERIDO CONTENTS OF BOX 8 / CONTENU DE LA BOÎTE 8 CONTENIDO DE LA CAJA 8 Hardware blister pack / Blister des quincailleries Blíster de herraje...
Page 49: Contents Of Box 6 / Contenu De La Boîte
TOWER 1 ROOF ASSEMBLY / TOUR 1 ASSEMBLAGE DU TOIT / ENSAMBLE DEL TECHO DE LA TORRE 1 PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS CONTENTS OF BOX 6 / CONTENU DE LA BOÎTE 6 CONTENIDO DE LA CAJA 6 GCP (x1) Caution! There are two poles, one for each tower, that look similar.
Page 50 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DWX (x6) BTS (x6) CVZ (x12) • Attach two roof panels (DXP) together with the hardware indicated. Repeat this step for the last two roof panels. •...
Page 51 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) DWX (x6) BTS (x6) ARN (x1) AAN (x1) CVZ (x12) •...
Page 52 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXY (x8) BTS (x8) CVZ (x8) • Flip the roof over and install the roof supports (DXQ) with the hardware indicated. •...
Page 53 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) CUZ (x8) • Tighten the hardware securing the roof supports, then install the domed roof cap (DXR) using the hardware shown. Line up the arrows at the roof panels with the arrows on the domed roof cap.
Page 54 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) AUH (x2) AAN (x2) • Attach the roof in the following two locations. •...
Page 55 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Using two adults, place the top rail (GCX) against the top of the tower poles. This rail will be placed above the opening in the tower.
Page 56 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) AUH (x2) AAN (x2) 3.10 • Using two adults, attach the top rail (GCX) against the top of the tower poles with the hardware indicated. •...
Page 57 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3.12 • Slide the bridge support pole (GCP) under the top rail (GCX) and place it into the recession on the deck. •...
Page 58 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DSA (x1) ABL (x1) BTS (x3) DXS (x2) 3.13 • Attach the bridge support pole (GCP) at the deck with the hardware indicated. •...
Page 59 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXX (x2) BTS (x2) 3.14 • Attach the ﬁ nal climbing handle (DYA) to the bridge support pole (GCP) with the hardware indicated. •...
Page 60: Tower 1 Walls Assembly
TOWER 1 WALLS ASSEMBLY / TOUR 1 ASSEMBLAGE DES MURS / ENSAMBLE DE LAS PAREDES DE LA TORRE 1 HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO CONTENTS OF BOX 8 / CONTENU DE LA BOÎTE 8 CONTENIDO DE LA CAJA 8 Hardware blister pack / Blister de quincaillerie Blíster de herraje...
Page 61 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) • Drill holes at the locations indicated. • Perces trous aux emplacements indiqués. •...
Page 62 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ASD (x8) AAN (x8) CVZ (x8) ENG (x8) • Attach the hand holds (EAA, EAB, EAC and EAD) to the climbing wall (DZY) with the hardware shown.
Page 63 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ARN (x5) AAN (x5) ENG (x9) • Do not insert a bolt in this location until instructed. •...
Page 64 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ARN (x5) ENG (x9) AAN (x5) • Do not insert a bolt in this location until instructed.
Page 65 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) DSA (x5) BTS (x5) ENG (x5) Exterior view / Vue extérieure Vista exterior Interior view /...
Page 66 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ARN (x5) ENG (x9) AAN (x5) • Do not insert a bolt in this location until instructed.
Page 67 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) DSA (x5) BTS (x5) ENG (x5) 4.10 Exterior view / Vue extérieure Vista exterior Interior view /...
Page 68 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ARN (x4) ENG (x8) AAN (x4) 4.11 • Do not insert a bolt in this location until instructed.
Page 69 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ARN (x1) AAN (x1) ENG (x1) 4.13 Exterior view / Vue extérieure Vista exterior Interior view /...
Page 70 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) DSA (x10) BTS (x10) 4.14 ENG (x10) Exterior view / Vue extérieure Vista exterior Interior vew /...
Page 71: Tower 1 Climber & Slide Assembly
TOWER 1 CLIMBER & SLIDE ASSEMBLY / TOUR 1 ASSEMBLAGE DE L’ESCALIER ET DU TOBOGGAN / ENSAMBLE DE LA ESCALERA Y EL TOBOGÁN DE LA TORRE 1 HARDWARE REQUIRED / QUINCAILLERIES REQUIS / HERRAJE REQUERIDO CONTENTS OF BOX 8 / CONTENU DE LA BOÎTE 8 CONTENIDO DE LA CAJA 8 Hardware blister pack /...
Page 72: Contents Of Box 1 / Contenu De La Boîte
TOWER 1 CLIMBER & SLIDE ASSEMBLY / TOUR 1 ASSEMBLAGE DE L’ESCALIER ET DU TOBOGGAN / ENSAMBLE DE LA ESCALERA Y EL TOBOGÁN DE LA TORRE 1 PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 CONTENIDO DE LA CAJA 1 EAJ (x4)
Page 73 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXX (x2) BTS (x2) • Secure the caps (EAI) to the left and right arched climber legs (EAH & EAG) with the hardware shown. •...
Page 74 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ARV (x16) • Attach the rungs (EAJ) to one of the climber legs (EAG or EAH, EAG is shown). Loosely tighten the screws so that they remain ﬂ exible while installing the remaining rungs and legs.
Page 75 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ARX (x2) 3/8 in/po (≈10 mm) AAN (x2) CVZ (x2) •...
Page 76 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) • Drill holes from underneath the deck. • Percez des trous de la surface inférieure du pont. •...
Page 77 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) • Drill four holes into the top part of the upper slide section (FHU) of the slide if necessary. •...
Page 78 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) FEH (x4) AZP (x4) CLM (x8) 5.10 • Place the slide parts upside-down. Slide the lower slide section (FHV) onto the upper slide section (FHU) until they align in place.
Page 79 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) 5.12 • Turn the slide over. Drill three holes into the top part of the slide. •...
Page 80 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ASD (x3) AAN (x3) CVZ (x6) 5.13 • Secure the slide to the deck assembly with the hardware shown. •...
Page 81: Tower 2 Frame Assembly
TOWER 2 FRAME ASSEMBLY / ASSEMBLAGE DE LA STRUCTURE DE LA TOUR 2 / ENSAMBLAJE DEL BASTIDOR DE LA TORRE 2 • The two towers look similar and share similar parts but not all parts are the same. Take special caution to identify the correct parts before assembly. •...
Page 82: Contenido De La Caja
TOWER 2 FRAME ASSEMBLY / ASSEMBLAGE DE LA STRUCTURE DE LA TOUR 2 / ENSAMBLAJE DEL BASTIDOR DE LA TORRE 2 HARDWARE REQUIRED / QUINCAILLERIE REQUIS / HERRAJE REQUERIDO CONTENTS OF BOX 8 / CONTENU DE LA BOÎTE 8 CONTENIDO DE LA CAJA 8 Hardware blister pack / Plaquette des quincaillerie Blíster de herraje...
Page 83 TOWER 2 FRAME ASSEMBLY / ASSEMBLAGE DE LA STRUCTURE DE LA TOUR 2 / ENSAMBLAJE DEL BASTIDOR DE LA TORRE 2 PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS CONTENTS OF BOX 3 / CONTENU DE LA BOÎTE 3 CONTENIDO DE LA CAJA 3 Parts bag / Sac des pièces Bolsa de piezas...
Page 84 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ASI (x1) AAN (x1) • Ensure you orient the short deck support tube (DWS) as shown. Attach two angled deck supports (DWU) to the small deck support tube.
Page 85 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ASI (x5) AAN (x5) • Repeat step 6.1 to attach the remaining two angled deck supports (DWU) to the second small deck support tube (DWS) •...
Page 86 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • There are two main leg poles (GBR), one tower pole (GEA) and one tower bridge pole (GCO). The tower swing bar pole (GEA) goes on the side of the tower holding the steering wheel and has a warning sticker on it.
Page 87 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 & 2 / CONTENU DE LA BOÎTE 1 & 2 CONTENIDO DE LA CAJA 1 & 2 The contents in both boxes 1 & 2 are the same types and quantities. Be sure to pull any parts from the box speciﬁed in this document’s section headers.
Page 88: Bolsa De Piezas
PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 3 / CONTENU DE LA BOÎTE 3 CONTENIDO DE LA CAJA 3 Parts bag / Sac des pièces Bolsa de piezas DZU (x1) DZT (x1) EBT (x4) DZS (x8) (x2) Bags / Sacs /...
Page 89: Contenido De La Caja 4
PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 4 / CONTENU DE LA BOÎTE 4 CONTENIDO DE LA CAJA 4 DZW (x4) CONTENTS OF BOX 5 / CONTENU DE LA BOÎTE 5 CONTENIDO DE LA CAJA 5 GCL (x7) GCM (x2) GCX (x2)
Page 90 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 6 / CONTENU DE LA BOÎTE 6 CONTENIDO DE LA CAJA 6 Warning sticker GBR (x3) Autocollant d’avertissement Etiqueta adhesiva de advertencia DXI (x2) GMD (x1) GCP (x1) Caution! There are two poles, one for each tower, that look similar.
Page 91 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 7 / CONTENU DE LA BOÎTE 7 CONTENIDO DE LA CAJA 7 Warning sticker Autocollant d’avertissement Etiqueta adhesiva de advertencia GEA (x1) GBR (x2) GEC (x1) DWZ (x8) EMM (x2) DWS (x2) DZV (x2)
Page 92 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 8 / CONTENU DE LA BOÎTE 8 CONTENIDO DE LA CAJA 8 (x2) (x2) (x2) CONTENTS OF BOX 9 / CONTENU DE LA BOÎTE 9 CONTENIDO DE LA CAJA 9 CAB (x1) CAA (x1) EIT (x1)
Page 93 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS LARGE PLASTIC PARTS / GRANDES PIÈCES EN PLASTIQUE PIEZAS GRANDES DE PLÁSTICO DYB (x4) DYC (x2) DZY (x4) DZZ (x8) EAF (x4) GCW (x1) DXR (x2) DXP (x8)
Page 94 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS This page intentionally left blank Cette page est intentionnellement laissée en blanc Esta página ha sido dejada en blanco intencionalmente viii...
Page 95 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x1) BTS (x1) • Secure the foot cap (DZO) to the tower bridge pole (GCO) with the hardware indicated. •...
Page 96 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Deck orientation is extremely important! Make sure the angled deck supports (DWU) are oriented as shown. The dimpled holes on the angled deck supports must face downward, toward the foot cap (DZO).
Page 97 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) AUH (x1) AAN (x1) CVZ (x1) DXZ (x1) BTS (x1) •...
Page 98 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) AUH (x1) AAN (x1) • Secure the side of the tower bridge pole (GCO) with the hardware indicated. •...
Page 99: Tower 2 Deck Assembly
SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS DXZ (x1) CVZ (x1) BTS (x1) • Place and attach the ﬁ rst two wall support braces (DWZ) with the hardware indicated. Only ﬁ nger-tighten this hardware at this time.
Page 100 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) 1/2 in/po (≈13 mm) ARX (x2) AAN (x2) 6.10 • Bend the braces (DWZ) toward the deck frame to align the holes. The braces are designed to be bent by hand. Attach the braces with the hardware indicated.
Page 101 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x3) BTS (x3) 6.11 • Secure foot caps (DZO) to the three remaining tower poles (GEA, GBR) with the hardware indicated. •...
Page 102 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) CVZ (x2) 1/2 in/po (≈13 mm) AUH (x2) AAN (x2) DXZ (x2) BTS (x2) 6.12 •...
Page 103 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) ARX (x6) AUH (x4) CVZ (x4) 1/2 in/po (≈13 mm) DXZ (x4) BTS (x4) AAN (x10) 6.14 6.15...
Page 104 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x2) BTS (x2) 6.16 • Secure the tower extensions (EMM) to the tower poles (GBR) with the hardware shown. •...
Page 105 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x4) BTS (x4) 6.18 • Attach three of the handrails (DXE) to the tower frame with the hardware indicated. Roll the tower frame over to make it easier to attach the handrails as long as the unit is on a soft surface, such as grass or cardboard.
Page 106 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 6.19 • Align the holes in the pole caps (DWR) with the holes in the tower poles, and insert the caps. •...
Page 107 TOWER 2 DECK ASSEMBLY / TOUR 2 ASSEMBLAGE DU PONT / ENSAMBLE DE LA CUBIERTA DE LA TORRE 2 HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO CONTENTS OF BOX 8 / CONTENU DE LA BOÎTE 8 CONTENIDO DE LA CAJA 8 Hardware blister pack / Blister de quincaillerie Blíster de herraje...
Page 108 TOWER 2 DECK ASSEMBLY / TOUR 2 ASSEMBLAGE DU PONT / ENSAMBLE DE LA CUBIERTA DE LA TORRE 2 PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS CONTENTS OF BOX 7 / CONTENU DE LA BOÎTE 7 CONTENTS OF BOX 4 / CONTENU DE LA BOÎTE 4 CONTENIDO DE LA CAJA 7 CONTENIDO DE LA CAJA 4...
Page 109 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) • Using a 3/8 in (10 mm) drill bit, drill the deck at the eleven locations indicated. Ensure you drill down from the top- side.
Page 110 Lifetime Products, Inc. or death. PO Box 160010 • Freeport Center, Bldg. D-11 • Clearﬁeld, UT 84016 • U ou mort. Lifetime Products, Inc.
Page 111 • surfaces. • Risk of using helmets and other items that can wrap around a child’s neck, become entangled or entrapped by the • equipment, and lead to strangulation or death. Lifetime Products, Inc. PO Box 160010 • Fre...
Page 112 Lifetime Products, Inc. PO Box 160010 • Freeport Center, Bldg. D-11 • Clearﬁeld, UT 84016 • U 2.5” x 5.5” SONNEL. on d’un adulte devrait être ur enfants de tous âges.
Page 113: Tower 2 Roof Assembly
Lifetime Products, Inc. PO Box 160010 • Freeport Center, Bldg. D-11 • Clearﬁeld, UT 84016 2.5” x 5.5” DXO (x1) On-site adult supervision should be provided for children of all ages.
Page 114 Risk of using helmets and other items that can wrap around a child’s neck, become entangled or entrapped by the • Ris d’u equipment, and lead to strangulation or death. Lifetime Products, Inc. PO Box 160010 • Freepo DXO (x1)
Page 115 Lifetime Products, Inc. or death. PO Box 160010 • Freeport ou m NO SUBIR NI PA -site adult supervision sh...
Page 116 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXZ (x1) 1/2 in/po (≈13 mm) BTS (x1) (x1) CVZ (x1) ARN (x1) AAN (x1) •...
Page 117 • equipment, and lead to strangulation or death. d’un enfant, devenir enchevêtrés ou piégés par l’équipement, et causer l’étranglement ou mort. Lifetime Products, Inc. PO Box 160010 • Freeport Center, Bldg. D-11 • Clearﬁeld, UT 84016...
Page 118 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) BTS (x4) DXZ (x2) DXX (x2) 7.12 • Repeat step 7.12 to install the remaining “A” rail handles (DXF). •...
Page 119 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXX (x4) BTS (x4) 7.14 • Repeat step 7.12 to install another two “B” rail handles (DYA). •...
Page 120 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/16 in/po (≈5 mm) DXX (x6) BTS (x10) DXZ (x4) 7.15 NING / AVER DO NOT CLIMB ON E PAS GRIMPER NI NO SUBIR NI PA -site adult supervision sh...