Classic Accessories M5 Manual

Instructions: Camo Boat Motor Cover M 5
CAUTION
• For storage only—NEVER use this
cover when motor is running.
• Do not use this product while
transporting. It could come off in
traffic and cause injury to others.
Installation
Working from the bottom slip your cover
over the propeller housing shaft and
then up over the motor housing. Cinch
the bottom draw cord over the propeller
housing to fit your motor. Press both ends
of the cord lock, sliding the lock to the
desired position on the cord then release.
Repeat with the upper cord lock at the
base of the motor housing.
Cleaning and Care
Proper care will extend the life of your boat
motor cover.
If your boat motor cover becomes dirty,
it can be cleaned with lukewarm water and
a soft brush. DO NOT USE SOAP—it can
damage the protective coatings on your
cover.
Storage
Be sure your cover is completely dry before
you store it for any extended period.
CLASSIC ACCESSORIES, INC.
22640 68th AVENUE SOUTH
KENT, WA USA 98032 © 2 0 1 5
c l a s s i c a c c e s s o r i e s . c o m
20-268-156501-RT, 20-267-146501-RT
15cB51_18128