Power Adapter; Power Line - E-Pos EP-545T Series User Manual

Impact dot-matrix printer
Table of Contents

Advertisement

Connection
a.Connect the adapter cable to power connector of the printer.
b.Connect the interface cable to the connector on the rear panel of the printer.
c.Connect the cash drawer's RJ-11 phone jack to the connector on the rear panel.
a

Power adapter

Power line

c
b
Installation of Paper Roll and Ink Ribbon
Please install after turn on the printer with indicators on.
a. Open the top cover.
b. Install the paper roll as the picture showing direction
c. Insert the end of the bottom paper into the paper take-up spool,be sure that the paper is aligned
with the spool's flange so that the paper is taken up by the spool.
d. Cut redundant paper by the cutter.
e. Open the printer's cover,turn the knob five or six times in the direction of the arrow,insert the ink
ribbon,and push the ribbon cassette down until it clicks.
-----------------
------------------ 4
IMPACT DOT MATRIX PRINTER

Advertisement

Table of Contents
loading

Table of Contents