Subscribe to Our Youtube Channel
Related Manuals for E-Pos ECO250
Summary of Contents for E-Pos ECO250
- Page 1 User’s Manual ECO250 THERMAL RECEIPT PRINTER E-POS International L.L.C www.eposintl.com...
-
Page 2: Safety Notice
1.Safety Notice * Don’t touch the Head of printer with anything. *Don’t touch the cutter blade. * Don’t bend the power cord excessively or place any heavy objects onto it. * Don’t use the printer when it is out of order. This can cause a fire or and electrocution. * When connecting or disconnecting the plug, always hold the plug-not the cord. - Page 3 4. Features * 250mm/sec high-speed printing * High print quality * Various interface available ( Serial+USB+Ethernet) * Support NV images download * Compatible with ESC command set * Integration of main board and interface card achieves high integration and high reliability. *Optimization design on USB assures more convenient operationthat PC host communication port will remain the same after replacing new printer or USB port.
-
Page 4: Specifications
5.Specifications Model ECO250 Printing speed 250mm/sec Dimension: width: 79.5± 0.5mm Paper roll Max diameter: 83mm Printing width 64/72mm Dot pitch 576dots / line&512dots / line ANK Character: Font A: 12× 24dots Character Font B: 9× 17dots Print command Compatible with ESC... -
Page 5: Installing The Roll Paper
7. Installing the roll paper a. Open the printer cover. b. Install the roller in the roll paper, and put them into the printer. c. Pull out some paper outside the printer and then close the printer cover. d. Close the top cover. Press the printer cover to avoid error position of roll paper. e. -
Page 6: Buttons And Indicators
8. Setting the Printing Mode (DIP switches) The DIP switches are used to set the printer to perform various functions, such as cutter mode, character set, speed, beeper, print density and etc. 9. Buttons and Indicators ------------------6 ----------------- THERMAL RECEIPT PRINTER... -
Page 7: Cutter Maintenance
10. Functions of buttons and indicators （1）. FEED Button Press to feed paper manually. （2）. PAPER Indicator When this indicator is lighting as well as the ERROR indicator, printer is out of paper. When this indicator is dim as well as the ERROR indicator, printer has paper. When this indicator is lighting but the ERROR indicator is dim, roll paper is near end. -
Page 8: Professional Functions
1. Open the cover by the arrow direction 2. Turn the gear to reset the cutter 12. Professional Functions a. 250mm/sec high-speed printing b. Support connecting to WLAN printing ------------------8 ----------------- THERMAL RECEIPT PRINTER... -
Page 9: Driver Setup
13. Driver Setup a. Run the printer Setup Guide and click "Next" to continue b. Choose the printer that you're using and click "Next" to continue c. Choose the printer port to continue ------------------9 ----------------- THERMAL RECEIPT PRINTER... - Page 10 d. Click "install from disk"to continue ------------------10 ----------------- THERMAL RECEIPT PRINTER...
- Page 11 e.Insert the bundled driver CD into the CD-ROM drive to begin the installation f. Choose your printer model to continue the printer software installation ------------------11 ----------------- THERMAL RECEIPT PRINTER...
- Page 12 ------------------12 ----------------- THERMAL RECEIPT PRINTER...
Need help?
Do you have a question about the ECO250 and is the answer not in the manual?
Questions and answers
ECO250 Driver link
The driver for the E-POS ECO-250 Thermal Printer can be found on the website mentioned in the context: [https://www.oscaret.com/e-pos-eco-250](https://www.oscaret.com/e-pos-eco-250).
This answer is automatically generated