Table of Contents
Advertisement
Quick Links
Thank you
Thank you very much for choosing for a EUROM device. You have made a good
choice! We hope you will be satisfied about its functioning.
To get maximum profit from your product, it is important to read this manual
attentive and totally before use, and to understand what is written. Read especially
the safety instructions: they are there to protect you and your environment.
Keep the manual in a safe place for future reference. Store also the package: that
is the best protection for your product in times of no-use. And if you at any time
pass the appliance on, pass on the manual and package too.
We wish you a lot of fun with the Partytent heater 1502 or 2100!
Eurom
Kokosstraat 20
8281 JC Genemuiden (NL)
info@eurom.nl
www.eurom.nl
This manual has been complied with the utmost care. Nevertheless, we reserve the
right to optimize this manual at any time and to adjust it technically. The image
used may differ.
________________________________________________________
Symbol Explanation
To prevent overheating: Do not cover the
device!
Be careful: hot surface!
9
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EUROM 1502
Summary of Contents for EUROM 1502
- Page 1 Thank you Thank you very much for choosing for a EUROM device. You have made a good choice! We hope you will be satisfied about its functioning. To get maximum profit from your product, it is important to read this manual attentive and totally before use, and to understand what is written.
- Page 2 Technical specifications Partytent heater 1502 2100 Heating elements Carbon Carbon Number of elements Heating capacity 750-1500 Watt 900-1200-2100 W Consumption max. 1500 Watt 2100 Watt Connected power 220-240V~50Hz 220-240V~50Hz Protection factor IPX4 IPX4 Operation Manual Manual Dimensions 45 x 45 x 22 cm...
- Page 3 then choose a lead that is as short as possible with power of at least 10A and 2000W (type 1502) or 16A and 2500W (type 2100). The cable must be completely uncoiled if a cable-winding device is used. Ensure that the party-tent heater never falls into water or any other ...
- Page 4 instruction booklet. Keep children and pets out of the vicinity of the device. Switch the party-tent heater off and remove the plug from the socket: - after every use of if you are leaving the location - before moving or cleaning the device - if it breaks down or needs maintenance Do not use the device if it has been subject to a fall, has been ...
- Page 5 Installation 1: standard attachment chain (50 cm) 2: extra attachment chain (30 cm) with 2 karabiner hooks The party-tent heater must be hung so that there is 40 cm of free space between the decorative cover and any ceiling, tent canvas etc. Additionally, at least 50 cm of space must be left at the sides, between the device and any side walls, tent canvas and other objects.
- Page 6 Insert the plug into the socket. Check beforehand whether this socket meets the requirements indicated on the party-tent heater’s specification plate, i.e. 220- 240V~50Hz. Partytent-heater 1502 Pull on the pull-cord once. The lamp will come on and the indicator light will come on. The partytent-heater will emit 750W of heat.
- Page 7 Pulling on the cord again will switch on the larger, higher lamp (1200W). The corresponding indicator light will come on. Pulling on the pull-cord for a third time will switch on both lamps. Both indicator lights will now come on and the heater will emit 2100W of heat. ...
Need help?
Do you have a question about the 1502 and is the answer not in the manual?
Questions and answers