Selecting The Sound Enhancement (E.a.m.); Selecting The Sound Enhancement - Toshiba SD-400V Owner's Manual

Advanced playback
Selecting the sound enhancement (E.A.M.*)
You can easily switch the sound enhancement to your preference.
*E.A.M.: Enhanced Audio Mode

Selecting the sound enhancement

DVD
CD
1
Press E.A.M.
The sound enhancement selection
E.A.M.
appears.
2
Select the sound enhancement by
pressing E.A.M. or / .
Each time you press the button, the sound
enhancement changes.
Normal:
Normal sound.
3D (N-2-2):
To obtain expansive virtual surround
sound effects from just two speakers.
Dialogue:
To control dynamic range to make
dialogues easier to hear (only when
playing a DVD video disc recorded
on the Dolby Digital recording
system).
• To use this enhancement on
sounds output from the
BITSTREAM/PCM (DIGITAL)
AUDIO OUT jack, be sure to set
"Audio Out Select" to "PCM".
32
To turn off the audio enhancement selection
Press ENTER.
ENTER
Notes
• Actual effects to sounds may vary depending on the
speakers. Make the selection to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD video player is connected to an amplifier
equipped with Dolby Pro Logic Surround, select "Normal".
Otherwise, Dolby Pro Logic Surround may function
differently than usual.
• Selecting "Dialogue" disables "Dynamic Range Control"
function .
40
Spatializer ® 3-Dimensional Sound Processing provided by Desper
Products. Inc.
Certain audio features of this product manufactured under a license
from Desper Products, Inc., Spatializer
device are trademarks owned by Desper Products, Inc.
40
2
ENTER
1, 2
Alternatively leave the DVD video
player unoperated for about 5
seconds after having made the
selection.
® and the circle-in-square