Control Panel - HJM VM23 Instructions Manual

Ventilador Mesa VM23-30-40_Maquetación 1 10/11/17 10:03 Página 18
1. Screws (4 pieces)
2. Base
3. Main body

4. Control panel

5. Motor shaft
6. Oscillation knob
7. Safety screw
8. Front grille
ASSEMBLING
1. Unscrew the lock ring of the back grille (9) of the motor shaft (4).
2. Insert the rear grille (10) on the motor shaft (4) making sure that
the handle on the back is facing upwards and the locking pins (A-
B) are in the vertical holes of the rear grille. Screw the locking ring
(9) by turning it clockwise.
3. Insert the fan (8) on the motor shaft (4).
4. Open the clips of the front grille (7) and place it on the back grille
(10) making sure that the logo on the central stud is placed hori-
zontally, parallel with the floor.
5. Find the proper position to lock the clips and insert the safety
screw of the grille (6).
VM30 / VM40
1. Mount the base on the main body fixing it with the 4 provided
screws as shown in figure.
9. Lock ring of the fan
10. Fan
11. Lock ring of the back
grille
12. Back grille
13. Motor
14. Lock ring of the grille
- 18 -
E
N
G
L
I
S
H