Application Interfaces; About This Chapter; Definitions Of Lga Pins; Pin Definitions - Zte ZM8300G Hardware User Manual

3

Application Interfaces

3.1 About This Chapter

This chapter describes the following major interfaces provided by the ZM8300G module:

Power interfaces

Control signal interfaces

DEBUG_UART interface

BLSP interfaces

GPIO interfaces

USIM interface

USB interface

Audio interfaces

ADC/MPP interfaces

JTAG interface

Antenna interfaces

3.2 Definitions of LGA Pins

The ZM8300G IoT module uses the LGA package and has 67 pads, namely, 58 signal pads,
seven JTAG test pads, and two PG pads. Using the pads, the ZM8300G module is connected
to a customer's IoT application platform. The following sections describe interfaces provided
by the ZM8300G module.
3.2.1

Pin Definitions

Table 3-1 provides definitions for input/output parameters of pins of the ZM8300G module.
Table 3-1 Definitions for Input/Output Parameters of Pins of the ZM8300G Module ◆Note 1
Type
DO
DI
B
PI
PO
I
<All rights reserved. No distribution without prior permission of ZTE.>
14
ZTE ZM8300G Module Hardware User Manual
Description
Digital output
Digital input
Bidirectional digital
Power input
Power output
In