Member States relating to the making available on the market of non - automatic weighing instruments. • ORAVA electrical appliances are manufactured according to state-of-the-art knowledge and recognized safety regulations. Nevertheless, improper or improper use or improper use may result in injury or endangerment to the life of the user or a third party or to a third party.
Page 3
• The manufacturer is not responsible for damages caused during transportation, misuse, damage or destruction of the equipment due to unfavorable weather conditions. • Use the appliance only for the intended purpose and in the manner specified by the manufacturer. 1.2 Safety of the operating environment •...
2. Special Safety Notices • Electrical equipment is designed and manufactured in such a way as to allow for safe operation and use by persons without a professional qualification. Despite all the measures taken by the manufacturer to ensure safe use, handling and use, it carries with it certain residual risks and associated potential hazards.
Page 5
• If the equipment has been transported and stored at low temperatures or excessive humidity (eg in the winter), first leave it ½ to 1 hour „acclimatize“ at room temperature to remove any moisture in the electronics that occurs when the ambient temperature changes. There is a risk of damage to the device! Location/Installation •...
Page 6
• Store the device in a clean and dry place. Do not load the device during storage. • Never overload the machine beyond the limits set by the technical specifications! • If the device has non-standard features, have it checked by a specialist workshop.
Page 7
• Insert the batteries to match the „+“ and „-“ symbols on the batteries and on the inside of the device cover. • Do not handle the batteries with metal tools (eg tweezers, etc.). Conductive contact between the two poles of the battery may cause a short circuit.
Operation Display description 1 alarm 2 Tare (package weight/container) 3 negative value 4 zero weight 5 weighing mode (kg) 6 units of weight (English) (lb) 7 units of weight (English) (oz) 8 units of weight (g) 9 Set the timer 10 temperature Measurement Mode (°C, °F) Preparation Power supply...
Weighing 1 Place a bowl or other container on the weighing board before switching on the appliance. 2 Press the “ON/OFF” button to switch on the balance. 3 Wait until “0” appears on the display before weighing. 4 Press „UNIT“ to select the weighing mode in grams or kilograms.
Case 2: If the total weight of the weighed food is greater than 4% of the maximum weight (more than 200 g for a 5,000 g model) After the first weighing, press the “Z/T” button. “0g” appears on the display. “TARE” in the upper left corner of the display indicates that the “TARE”...
Automatic shutdown If the balance is not used for a certain period of time and the display shows zero for a longer period of time, the balance will automatically turn off in approximately 2 minutes. Manual shutdown Press the “ON/OFF” button to turn off the unit after use. The display goes out.
Cleaning and maintenance Clean the scale only with a dry cloth slightly moistened with water. Do not use any abrasive cleaning agents or solvents such as alcohol, benzine, or thinner. Do not immerse the scale in water. Clean all metal parts immediately after weighing fatty foods, spices, heavily flavored and colored foods.
Technical specifications Power supply: 3 V DC (2 x 1.5 V AAA batteries - not supplied) Unit of measure: metric (g, kg) english (pounds, ounces) Maximum weight: 5 000 g Bowl volume: 2.1 l Weight dimensions (W x H x D):190 x 50 x 190 mm Bowl dimensions (W x H x D): 213 x 90 x 213 mm Weight:...
Page 14
Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika Česká republika DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT The symbol on the product or on its packaging indicates that this product does not belong to household waste.
Warranty conditions A warranty period of 24 months is provided for this device. When exercising the right to a warranty service, return the warranty card and the cash receipt of the equipment to the service center together with the product. The date of the warranty card and proof of purchase must be the same.
Need help?
Do you have a question about the EV-13S and is the answer not in the manual?
Questions and answers