Linx 8900 Operating Manual page 26

Linx 8900 Operating Manual —
Printer user interface
•
Total Items To Code—this option is only available if you select the End Time target
method. Enter the number of items required to be coded before your selected target end
time.
•
Items Remaining—this option is only available if you select the End Time target
method. It allows you to make running changes to the number of items that remain to
be coded before your selected target end time (for example, to make sure that a target
output is maintained). Enter the revised number of items to be coded.
•
Target Rate— this option is only available if you select the Output Rate target method.
Enter a value for the output rate of between 1 and 90000 prints per hour.
•
Reset Batch Count—you can use this option to reset the batch print count (see
'Customise Home Screen' on page 45) when certain conditions are met. The following
options are available:
❐ None—the batch print count is never reset automatically, but you can reset it
manually.
❐ Message Selected—the batch print count is reset when a message is selected for
printing.
❐ Start Print—the batch print count is reset when you start a print.
❐ Message Selected or Start Print—the batch print count is reset when a message is
selected for printing or when you start a print.
•
Prompt—you can use this option to display a dialog to remind you to set a target end
time or target rate when certain conditions are met. The following options are available:
❐ None—no prompt is displayed.
❐ Message Selected—you are prompted when a message is selected for printing.
❐ Start Print—you are prompted when you start a print.
❐ Message Selected or Start Print—you are prompted when either a message is
selected for printing or when you start a print.
Page 19 of 182 TP1A002–1 English
Aug 2015