Linx 8900 Operating Manual page 140

Linx 8900 Operating Manual —
Printer communications
3 Use the scroll bar to move through the list of messages. To select messages to copy:
•
Touch the name of the required message in the list. The printer displays a
confirmation screen. Touch the Yes button to select that message and return to
the Copy Messages to USB screen. Touch the No button to cancel the selection
and return to the Copy Messages to USB screen. A check mark appears in the
box to the left of the message name if the message is selected.
or:
•
Touch the box to the left of the name of the required message. A check mark
appears in the box to the left of the message name to show that the message is
selected. To deselect a message, touch the box to the left of the name of the
required message. The check mark in the box to the left of the message name is
removed.
•
To select all messages, touch the box labelled "Select all files for Copy". Check
marks appear in all the boxes to the left of all the message names. To deselect all
messages, touch the box labelled "Select all files for Copy" again. The check
marks in all the boxes to the left of the message names are removed.
Figure 141. Copy Messages to USB screen: all messages selected
The Copy button is enabled when any message is selected. The Copy button is
disabled if there are no messages selected.
Touch the Copy button to copy the selected messages to the memory device. If the
4
memory device contains a file that has the same name, you can do one of the
following:
•
Overwrite the file on the memory device (touch the Yes button on the
confirmation screen. To cancel the copy operation for that file, touch the No
button).
•
Overwrite all files on the memory device (select the "Remember my decision
for existing files" box and then touch the Yes button on the confirmation screen.
To cancel the copy operation for all files, select the "Remember my decision for
existing files" box, and then touch the No button).
Page 133 of 182
89214
TP1A002–1 English
Aug 2015