Advertisement
Table of Contents
- 1 Free the Sensor Wire from the Right Side of the Treadmill Frame
- 2 Affix the Left Post Assembly to the Frame
- 3 Remove the Sensor Wire from the Top of the Right Post Assembly
- 4 Affix the Port Covers Onto the Side of the Frame
- 5 Add the Batteries Provided to the Monitor and Replace the Cover
- 6 Remove the Sensor Wire from the Upper Handle Tube
- 7 Push the Excess Sensor Wire Back into the Frame
- 8 Affix the Monitor to the Frame
- Download this manual
Advertisement
Table of Contents
Related Manuals for SMAI RACER FIT
Summary of Contents for SMAI RACER FIT
- Page 1 RACER FIT ASSEMBLY...
- Page 2 Free the sensor Wire from the right side of the Align the right post assembly with the bolts on the treadmill frame ensure that it is free from the body running platform, Ensure the sensor wire is hidden of the treadmill. Take all precautions to ensure you within the cavity and not caught between the right do not cut or damage the sensor wire in any way.
- Page 3 Remove the sensor wire from the top of the Right Affix the port covers onto the side of the frame post assembly. using the screws provided, Please affix with a Connect the sensor wire from the right post screwdriver as the impact from over tensioning assembly to the wire within the upper handle tube this component with a cordless drill may crack the ensuring the wire is not damaged in the process...
- Page 4 Remove the sensor wire from the upper handle tube Push the excess sensor wire back into the frame and connect it with the sensor wire on the back of (so that it is free and cannot be damaged in any the monitor.
Need help?
Do you have a question about the RACER FIT and is the answer not in the manual?
Questions and answers