One Rehab QFold User Manual page 13

7.3 Back Seat Cover
To fit the seat back cover, make sure the back support section is positioned as shown,
[Fig 7.2.1] then simply pull down the back cover over the back, pulling the flap under
the back bar. The flap can be securely tightened by the Velcro as shown. [Fig 7.3.1]
7.4 Base Seat Cover
To fit the seat base cushion, simply line up the Velcro strips on the cushion and base
[7.4.1] of seat and insert into place [7.4.2].
[Fig 7.4.1] [Fig 7.4.2]
13