Connecting The Power Supply; Switching On; Inserting Media - Technika A700 Owner's Handbook Manual

CONNECTING POWER
ON
OFF
Plug the DC power jack of the adapter into the DC socket in the DPF.
Plug the power adapter into the mains point.
Switch on at the mains.
Switch the ON /OFF switch on the frame to ON.
• You can leave the power switch on, and use the
handset to turn the frame on or set it to Standby mode.
• To turn off the power off, slide the ON/OFF switch to OFF.
If the DPF is being switched on for the first time, or after a default
setting reset, you must first select a display language.
Use the (
the handset to make your selection.
Press the
In the next screen, Use the (
buttons on the handset to select YES or NO.
Press the
There are 14 languages to choose from. Make your selection and press
the button on the DPF or OK on the handset to confirm.
button on the
The welcome screen will briefly display followed by the Main Menu.
Page 8
) or ( ) buttons on the DPF or the
button on the DPF or OK on the handset to confirm.
) or ( ) buttons on the DPF or the
button on the DPF or OK on the handset to confirm.
buttons on