Tripp Lite PDUH30-ISO Owner's Manual page 4

Installation
2
Attach the input plug of the PDU to a grounded outlet. Insert the
plug directly into a grounded outlet that does not share a circuit with
a heavy electrical load (such as an air conditioner or refrigerator).
Note: Select models include an input plug adapter that converts the twist-
lock input plug to a straight-blade input plug. Attach the input plug adapter
to the input plug if you wish to plug the PDU into a compatible straight-
blade outlet.
3
Attach equipment to the PDU. Do not exceed the load rating
of the PDU. The total electrical current used by the PDU will be
displayed on the digital meter in amperes.
Features
1
NEMA 5-15P
2
NEMA 5-15R
3
4
NEMA L5-20P
NEMA L5-30P PLUG
NEMA 5-15/20R
NEMA L5-20R RECEPTACLE
3
Circuit Breaker: If the current drawn by the equipment connected to the PDU exceeds
the Maximum Current Rating, the circuit breaker will trip to prevent possible damage. When
a circuit breaker trips, its plunger will pop up. Disconnect excess equipment and allow the
breaker to cool at least one minute before depressing the plunger to reset the breaker.
4
Ammeter (Select Models): The total electrical current used by the PDU will be displayed on
the digital meter in amperes (applies only to models equipped with an ammeter).
NEMA L5-30P PLUG
1
NEMA L5-30P
NEMA L5-20R RECEPTACLE
2
NEMA L5-30R
4
2
3
Input Plug (Varies by Model)
Outlets (Vary by Model): During normal
operation, the outlets distribute AC power
to connected equipment.