Tripp Lite PDUH30-ISO Owner's Manual page 3

Installation
Note: The illustrations may differ somewhat from your PDU model.
1
Determine Installation Configuration. The PDU supports four primary installation configurations: 1U Rack, 0U Rack,
Wall and Under-Counter. Choose a configuration and follow the installation instructions in the appropriate section of
Step 1 before proceeding to Step 2.
Note: Regardless of installation configuration, the user must determine the fitness of hardware and procedures before mounting.
The PDU and included hardware are designed for common rack and rack enclosure types and may not be appropriate for all
applications. Exact mounting configurations may vary.
1-1
1U Rack Installation. Attach the PDU to the rack by inserting four
user-supplied screws
and into the mounting holes of the rack rail as shown.
Note: If the mounting ears are not preinstalled, please add the ears before
mounting.
1-2
0U Rack Installation. Part 1: Remove the screws
the mounting brackets to the PDU, change the orientation of the
brackets as shown and reattach the brackets. Use only the screws
supplied by the manufacturer or their exact equivalent (#6-32, 1/4"
flat head). Part 2: Attach the PDU vertically by inserting two or more
user-supplied screws
and into mounting points in the rack or rack enclosure.
1-3
Wall Installation. After repeating Part 1 above, attach the PDU to
a stable mounting surface by inserting two or more user-supplied
A
screws through the PDU mounting brackets
mounting points on the mounting surface.
1-4
Under-Counter Installation. After repeating Part 1 above, attach
the PDU to a stable mounting surface by inserting four user-
supplied screws A through the PDU mounting brackets
secure mounting points on the mounting surface.
A
through the PDU mounting brackets
A
through the PDU mounting brackets
B
1-1
C attaching
B
1-2
B
and into secure
1-3
B and into
1-4
3
B
A
B
B
C
B
A
A
A
C
A
A
C
A
A