Roland J-6 Owner's Manual page 18

Functions and Menus
Using the menus
1. Hold down the [SHIFT] button and press the [B (MENU)] button.
2. Use the [TEMPO/VALUE] knob to select the item, and then press the [D (ENTER)] button.
The value is displayed.
3. Turn the [TEMPO/VALUE] knob to set the value.
4. Press the [C (EXIT)] button to return to the list of menus (step 2).
5. When you are finished making the settings, press the [C (EXIT)] button again.
List of menus
This is a list of menus that you can execute using the [SHIFT] + [B (MENU)] button combination.
Item
0–127
vOL
(Volume) (*1)
-12–12
trAn
(Transpose) (*1)
OFF, On
d.Syn
(Delay Sync) (*1)
1-4, 1-3, 1-2,
1–8
bEAt
(Beat) (*1)
1–127
A.vLo
(Accent Velocity) (*1)
P.chg SñEP, 1–8
(Pattern Change) (*1)
1, 2, 3, 4, 6, 8,
S.cLk
(Sync Clock) (*1)
12, 24
CH 1–16
(MIDI Channel)
18
Value
Sets the pattern's volume.
Transposes the sounds made by the sound generator.
Synchronizes the delay time to the tempo.
Sets the number of beats (the step length) in one measure of the pattern.
1-4: Sixteenth note
1-3: Eighth-note triplet
1-2: Eighth note
1–8: Number of beats per quarter note
* You can also switch between settings by holding down the [PATTERN] button
and turning the [TEMPO/VALUE] knob.
Sets the velocity of accents included in phrases.
Sets the timing for changing the pattern (at the end of a step, or after a certain
number of beats).
Sets the number of sync clocks per beat.
Specifies the MIDI transmit/receive channel.
Explanation