Us-144 Mkii Control Panel Settings; Overview; Control Panel Settings; Audio Performance - Tascam US-144MKII Owner's Manual

4 – US-144 MKII Control panel settings

Overview

The Control Panel lets you make various
settings for the US-144MKII's functionality.
On Windows XP and Windows Vista, the
US-122MKII & US-144MKII Control Panel
shortcut can be found in the Windows Start
menu > Control Panel or the Start menu >
All Programs > TASCAM.
On Mac OS X, the US-122MKII & US-
144MKII Control Panel is located in the
Applications folder. Other useful audio and
MIDI settings for Mac OS X can be found in
Applications/Utilities/Audio MIDI Setup.
The Control Panel is divided into the
following two sections.
Status section
This shows the current status of the driver
and the connected hardware.
You cannot edit the settings from this
section.
Setting section
You can edit the various settings of the
driver.
NOTE
The Mac OS X US-144MKII control panel
has no settings.

Control panel settings

Audio Performance

The US-144MKII driver temporarily stores
input and output audio sample in buffers.
The size of these buffers can be adjusted.
A smaller buffer size will reduce the delay
when monitoring the audio signal, but
will require your computer to perform the
processing faster. If the processing does
not occur in time (e.g., if other system
operations are occurring), you may hear
clicks, pops, or dropouts in the audio signal.
A larger buffer size provides more safety
against such problems caused by other
system activities, but will produce greater
delay when monitoring the audio signal. You
should select the buffer size that works best
for your system.
On the Windows version of the US-144MKII
Control Panel, the Audio Performance
setting permits you to adjust the buffer size
that will be used by all audio applications.
The lowest latency setting is the minimum
buffer size, and the highest latency setting
is the maximum buffer size.
On Mac OS X, the buffer size is determined
by each audio application. Consequently,
there is no Audio Performance setting on
the Mac OS X version of the US-144MKII
Control Panel. Some applications select
the buffer size automatically while others
permit the user to select the buffer size.
Please consult your audio application's
documentation for details.
TASCAM US-144MKII
17