Detecto MedVue MVWIFI Installation, Configuration, And Operation Manual page 7

NETWORK CONFIGURATION, CONT.
MVWIFI Reset to Defaults
In the event that you change the network settings in such a way that you can no longer access
the MVWIFI or the MVWIFI configuration web page or you are having issues connecting to the
MVWIFI you may want to try and reset the MVWIFI option card.
With the weight analyzer on and in the Gross weight mode:
1. Press and hold the CLEAR (
2. The display will change to show SETUP REVIEW.
3. Release the CLEAR (
4. The display changes to show SETUP.
5. Press the ID/HEIGHT key until the ETHERNET/WIFI prompt is displayed.
6. Press the ENTER key until the RESET ETHERNET prompt is displayed.
7. Change this setting to YES (press the 1/YES key) and then press the ENTER key.
8. Wait for the MedVue to reset the MVWIFI.
) key for approximately 3 seconds.
) key.
8555-M519-O1 Rev D • MedVue MVWIFI Operation
5