Advertisement
Installation
■ Installing a unit using the WV-Q204/1S
q Install the rack mount brackets on both sides of the unit.
Using the bracket mounting screws (6 pcs.) for the rack
mount brackets, fix them firmly.
• Rack mount bracket (Large) x 1
• Rack mount bracket (Small) x 1
• Bracket mounting screws (M3 x 8: 6 pcs.)
■ Installing two or three units using the WV-Q204/2S
q Install the rack mount brackets on either side that will be
the ends of the jointed units. Using the bracket mounting
screws and fix them mounting brackets, fix them firmly.
w Place the joint brackets so that each of the adjacent units
can be jointed as shown and fix them with the bracket
mounting screws (M3x6).
When installing two units:
• Rack mount bracket x 2
• Joint bracket x 3
• Bracket mounting screws (M3 x 8: 6 pcs.)
• Bracket mounting screws
(Flat head, M3 x 6: 12 pcs.)
When installing three units (only for WJ-GXE500, WJ-GXE500E):
• Rack mount bracket x 2
• Joint bracket x 4
• Bracket mounting screws (M3 x 8: 6 pcs.)
• Bracket mounting screws (Flat-head M3 x 6: 16 pcs.)
Rack mount bracket (Small)
Rack mount
bracket
Rack mount
bracket
Flat-head screw
Rack mount bracket (Large)
Joint bracket
(Remove two screws at the rear side,
and fix the brackets with bracket
mounting screws (Flat head, M3 x 6)).
Flat head screws
Rack mount
bracket
Flat head screws
Flat-head screw
(Remove two screws at the
Joint
rear side, and fix the brackets
bracket
with bracket mounting screws
(Flat head, M3 x 6)).
Rack mount bracket
Bracket mounting
screws
Bracket mounting
screws
Bracket mounting screws
Advertisement
