Table of Contents
Advertisement
2. Fit the handset holder to the rail.
N.B. The handset holder button must
be depressed whilst fitting.
3. Secure the upper rail bracket into
position on the finished wall surface
using the wall screw provided
(if suitable).
4. Attach the lower rail bracket onto the rail and offer the rail into the
top bracket ensuring that the slot of the rail locates onto the lug of
the bracket.
5. Secure the lower rail bracket to the wall, using the wall screw
provided (if suitable).
6. Place the rail end caps into the brackets and push firmly into position.
7. Ensuring the hose washer is in the correct position; attach the non-
conical end of the hose to the valve body. Run the shower to clear
any debris that may be present.
8. Ensuring that the hose washer is in position, attach the shower head.
9. Place the hose in the handset holder.
9
Advertisement
Table of Contents
