Table of Contents
Advertisement
8. Without the elbows attached, fit
the valve body to the *mounting
bracket and place the elbow cover
plates, fixing nuts and copper olives
over the pipe tails.
*Note: to fit the valve body to the
mounting plate, push and twist to
engage the lugs.
9. Slide the elbows onto the pipe tails, push fully home and loosely
attach the nuts.
10. Ensuring that the rubbers seals are in place connect the elbows to
the valve body.
11. Securely tighten all nuts of the elbows using a suitable spanner.
12. Fit the control handle to the valve,
tighten the grub screw using the
hexagonal key and fit the cover cap.
13. Turn on water supplies and check
for leaks.
7
Advertisement
Table of Contents
