assembly instructions
ASSEMBLING HANDRAILS AND STEPLADDER
ref nº
description
17
MARG STD 28x145x1000
21
MARG STD 28x145x1795
23
MARG STD 28x145x2634
ref nº
description
33
CORBELET 46x145x225
19
LIM D ECH 28/145/1.612
20
LIM G ECH 28/145/1.612
13
MARCHE ECH 28x145x586
a
33
WOODEN STEPLADDER
The wooden stepladder is included for access to
the pool. Do not use for anything else.
Assemble the wooden stepladder and use it
as a template to define the separation of the
wooden blocks that support it. In the case
that the pool ahs an elongated shape, the
stepladder will be positioned on a small side.
Centre the external stepladder in relation to the
side.
Drill with a Ø 10 mm bit for wood the 2 support
and the 2 wooden blocks.
18
qty
2
1
2
9
6
6x90
qty
2
1
1
4
33
Fig. 24
Do not use the stepladder for other needs
different to those indicated in this manual.
Admitted maximum weight = 150 kgs..
Its is COMPULSORY to remove the stepladder
after using the pool.
According to the height of the pool, the
stepladder may need adjusting.
• Cut the supports of the ladder checking the
4x60
23
23
17
a
dimensions as shown in figure 24 at the bottom
part of the stepladder support and saw off the
part you do not need..
• Assemble the stepladder and position it as
shown in figure 25.
21
21
Fig. 23
13
19
20
Fig. 25